Datasheet

DS061 LUXEON Rebel ES Product Datasheet 20140728 ©2015 Lumileds Holding B.V. All rights reserved. 23
Product Binning and Labeling
Purpose of Product Binning
In the manufacturing of semiconductor products, there is a variation of performance around the average values given
in the technical data sheets. For this reason, Lumileds bins the LED components for luminous ux, color and forward
voltage (V
f
).
Decoding Product Bin Labeling
LUXEON Rebel ES emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for
emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination.
Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given
application.
Reels of LUXEON Rebel ES emitters are labeled with a four digit alphanumeric CAT code following the format below.
A B C D
A = Flux bin (P, Q, R, S etc.)
B & C = Color bin (W0, V0, U0 etc. for LXML-PWx2 series. 7A, 7B, 7C and 7D for LXWx-PWxx series.
5W, 5X, 5Y and 5Z for LXH7-PW40 emitter)
D = V
f
bin (P, R, S and T)