Datasheet

DS068 LUXEON Rebel & LUXEON Rebel ES Colors Product Datasheet 20150410 ©2015 Lumileds Holding B.V. All rights reserved. 5
Flux Performance, Binning, and Supportability
LEDs are produced with semiconductor technology that is subject to process variation, yielding a range of ux
performance that is approximately Gaussian in nature. In order to provide customers with ne granularity within the
overall ux distribution, Lumileds separates LEDs into xed, easy to design with, minimum luminous ux bins. To
verify supportability of parts chosen for your application design, please consult your Lumileds sales representative.
Optical Characteristics
LUXEON Rebel and LUXEON Rebel ES Colors at 350mA or 700mA, Test
Temperature
[1]
Table 3.
Color
Dominant Wavelength
[2]
l
D
,
or Peak Wavelength
[3]
l
P
Typical
Spectral
Half-width
[5]
(nm)
Dl
1/2
Typical Temperature
Coecient
of Dominant or Peak
Wavelength (nm/°C)
Dl
D
/ DT
J
Typical Total
Included Angle
[5]
(degrees)
u
0.90V
Typical Viewing
Angle
[6]
(degrees)
2u 1/2
Minimum Typical Maximum
Lime
[7] [9]
566.0 nm 567.5 nm 569.0 nm 100 0.01 160 125
Green
[7]
520.0 nm 530.0 nm 540.0 nm 30 0.05 160 125
Cyan
[7]
490.0 nm 505.0 nm 515.0 nm 30 0.04 160 125
Blue
[7]
460.0 nm 470.0 nm 485.0 nm 20 0.05 160 125
Royal Blue
[3] [7]
440.0 nm 447.5 nm 460.0 nm 20 0.04 160 125
Red
[8]
620.0 nm 627.0 nm 645.0 nm 20 0.05 160 125
Deep Red
[3] [8]
650.0 nm 655.0 nm 670.0 nm 20 0.05 160 125
Red-Orange
[8]
610.0 nm 617.0 nm 620.0 nm 20 0.08 160 125
Amber
[8]
584.5 nm 590.0 nm 594.5 nm 20 0.10 160 125
PC Amber
[7] [9]
587.8 nm 591.0 nm 592.0 nm 80 -0.01 160 120
Notes for Table 3:
1. LXML-PR02-xxxx and LXML-PB02-xxxx emitters are tested and binned at 700mA, all other LUXEON Rebel Color emitters are tested at 350mA.
2. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color. Lumileds maintains a tolerance of ±0.5 nm for dominant wavelength measurements.
3. Royal blue and deep red LEDs are binned by peak wavelength. Lumileds maintains a tolerance of ±2 nm for peak wavelength measurements.
4. Spectral width at ½ of the peak intensity.
5. Total angle at which 90% of total luminous ux or radiometric power is captured.
6. Viewing angle is the o axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
7. Lime, PC Amber, green, cyan, blue and royal blue products are built with Indium Gallium Nitride (InGaN).
8. All red, deep red, red-orange, and amber are built with Aluminum Indium Gallium Phosphide (AlInGaP).
9. Lime and PC Amber are binned by chromaticity coordinates.
Volume
Luminous Flux Bins