Datasheet

ManualsBrandsLUMILEDS ManualsHighPower-LEDsHighPower LED module Warm white 1530 lm 100 ° 42 V

General IllumInatIon

RoHS

COMPLIANT

LUXEON K delivers high ux at high ecacy in a small, easy-to-use

package. The high lumen density enables high light output in thermally

and space constrained systems (like retrot lamps) and high eciency in

systems aiming for high energy eciency (such as downlights). The small

size bolt-down package enables simple assembly in space constrained

systems. With Freedom from Binning, every LUXEON K white product falls

within a single 3-step MacAdam ellipse positioned around the center

point of the ANSI nominal CCT bins to deliver tight CCT control to ensure

consistency in system color point. In addition, these parts deliver the

lumen maintenance and reliability that all LUXEON LEDs are renowned for.

luXeon K

Plug and play matrix platform solution

with precise ux, V

and color

Features and BeneFIts PrImary aPPlIcatIons

300–5000 lumen packages for a range of options Downlights

3-step MacAdam ellipse color binning for exceptional lamp to lamp consistency Lamps

L2 design for a reduction in design costs

Full range of CCTs and CRIs including Royal Blue

LM-80 test report available

Summary of content (28 pages)

PAGE 1
General Illumination LUXEON K Plug and play matrix platform solution with precise flux, Vf and color LUXEON K delivers high flux at high efficacy in a small, easy-to-use package. The high lumen density enables high light output in thermally and space constrained systems (like retrofit lamps) and high efficiency in systems aiming for high energy efficiency (such as downlights). The small size bolt-down package enables simple assembly in space constrained systems.
PAGE 2
Table of Contents General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
General Information Product Nomenclature LUXEON K products are specified and binned “hot” (Tj = 85°C) under conditions comparable to those found in “real-world” lighting products.
PAGE 4
Product Selection Product Selection Guide for LUXEON K White, Junction Temperature = 85°C Table 1. Nominal CCT Emitter Count Part Number Test Current (mA) Minimum CRI Typical CRI Minimum Flux (lm) Typical Flux (lm) Maximum Flux (lm) 2700 * 3 LXK8-PW27-0403 87.5 80 83 270 285 320 2700 4 LXK8-PW27-0004A 350 80 83 360 400 430 2700 * 2700 * 4 LXK8-PW27-0404 87.
PAGE 5
Table 1 Continued.
PAGE 6
Optical Characteristics LUXEON K White at Test Current, Junction Temperature = 85°C Table 3. Nominal CCT Part Number Color Temperature CCT Typical Typical Total Included Angle [2] (degrees) u90V Typical Viewing Angle [2] (degrees) 2u ½ 125 100 LXKx-PW27-xxxx(A) 2700K 2725K LXKx-PW30-xxxx(A) 3000K 3045K 125 100 LXKx-PW35-xxxx 3500K 3465K 125 100 LXKx-PW40-xxxx(A) 4000K 3985K 125 100 LXKx-PW50-xxxx 5000K 5028K 125 100 Notes for Table 3: 1.
PAGE 7
Electrical Characteristics Electrical Characteristics at Test Current for LUXEON K White and Royal Blue, Junction Temperature = 85°C Table 5. Forward Voltage Vf [1] (V) Part Number Typical Temperature Coefficient of Forward Voltage (mV/°C) DVF / DTJ Typical Thermal Resistance Junction to Case (°C/W) Ru J-C Minimum Typical Maximum LXKx-Pxxx-0403 30 31.5 33.8 -21.0 5.5 LXKx-Pxxx-xx04(A) 10 10.5 11.3 -6.3 3.0 LXKx-Pxxx-x404 40 42 45.1 -30.1 3.0 LXKx-Pxxx-xx08(A) 20 21 22.6 -12.5 1.
PAGE 8
Absolute Maximum Ratings Table 7.
PAGE 9
Mechanical Dimensions LXKx-Pxxx-xxx3 Figure 1. Dimensions for LXKx-Pxxx-xxx3. Notes for Figure 1: 1. All dimensions are in millimeters. DS102 LUXEON K Product Datasheet 20140625 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 10
LXKx-Pxxx-xxx4(A) 3 1. (2 50 PL C PL 17.67 17.47 C S) B 7.50 (2PLCS) 3.62 3.22 1.50 (2PLCS) 9.40 R0.50 45 0.31 (2PLCS) 2 (2PLCS) 19.1 18.8 5 5 3.30 Dome Pitch 5.46 (2PLCS) 6.25 (2PLCS) 2. 86 1.65 2.10 .0 ° 8.50 (2PLCS) 0.50 Max. runner height from PCB surface S) (2 A 6.25 (2PLCS) 72 5. (2 PL A (2 C PL S) S) C 1 0.76 Silicone height from PCB surface 3.30 Dome Pitch R1.50 (4PLCS) 1.65 1.265 1.045 Board Thickness 3.40 3.20 (2PLCS) 2.40 2.
PAGE 11
LXKx-Pxxx-xxx6 Figure 3. Dimensions for LXKx-Pxxx-xxx6. Notes for Figure 3: 1. All dimensions are in millimeters. DS102 LUXEON K Product Datasheet 20140625 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 12
LXKx-Pxxx-xx08(A) 1. 50 (2 PL PL 3.62 3.22 C C S) S) 0.50 Max. runner height from PCB surface B 2 (2PLCS) 1.50 (2PLCS) 45 .0° 0.15 (2PLCS) 7.13 (2PLCS) 2. 80 5. 60 (2 (2 PL PL 22.65 22.35 C C 5.77 (2PLCS) 10.95 10.75 (2PLCS) 10 9.95 (2PLCS) 9.75 3 (2 5 .6 5 21 1.3 2 2 21 1.7 .2 5 5 A 8.98 (2PLCS) S) S) A 4.60 R1.50 (8PLCS) 0.76 Silicone height from PCB surface 1 3.35 3.25 (2PLCS) 1.265 1.045 Board Thickness 2 DETAIL A SCALE 8 : 1 2.45 2.35 2.25 (2PLCS) 3.
PAGE 13
LXKx-Pxxx-xx12(A) 3 (2 PL C PL (2 2 23 4.4 .9 5 5 50 1. A S) C 8.37 (2PLCS) 1.50 (2PLCS) 45.0° 0.80 (2PLCS) 80 60 5. (2 25.15 24.85 C S) A 10.97 (2PLCS) C PL (2 PL 3.30 (3PLCS) Dome Pitch S) 2. 4.63 (2PLCS) 2 (2PLC 6 12.10 11.90 (2PLCS) 0.50 Max. runner height from PCB surface 1.65 10.70 11.10 10.90 (2PLCS) S) B 3.62 3.22 2 24 4.3 .0 5 5 S) 5.80 0.76 Silicone height from PCB surface 3.30 (3PLCS) Dome Pitch R1.50 (12PLCS) 1.65 1.265 1.045 Board Thickness 3.35 3.
PAGE 14
2 23 4.4 .9 5 5 LXKx-Pxxx-xx16(A) 1. 50 (2 PL PL C S) C 3.62 3.22 2 24 4.3 .0 5 5 S) 0.50 Max. runner height from PCB surface B 8.37 (2PLCS) 2. S) C ) S PL C PL (2 60 (2 5. 80 3.30 (3PLCS) Dome Pitch 0.80 (2PLCS) 6 25.15 24.85 4.63 (2PLCS) 45 .0 ° 1.65 1.50 (2PLCS) 2 (2PLCS) 12.10 11.90 (2PLCS) 11.10 10.90 (2PLCS) 10.70 A 3 (2 10.97 (2PLCS) A 5.80 0.76 Silicone height from PCB surface 3.30 (3PLCS) Dome Pitch R1.50 (16PLCS) 1.265 1.045 Board Thickness 1.65 3.35 3.
PAGE 15
LXKx-Pxxx-xx24(A) 30.15 29.85 18.30 9.15 C1.1 x 45 (2X) 8.20 (2X) 0.50 Max. runner height from PCB surface R4.05 (3X) 1.50 (2X) 4.90 4.70 (4PLCS) 15 3 (2X) R1.50 (2PLCS) 3.62 3.22 A 14.40 14.20 (4PLCS) 13.40 13.20 (4PLCS) 2 (2PLCS) 5.33 (2PLCS) C1.1 x 45 A 11.84 (4PLCS) 1.50 (2PLCS) 1.265 1.045 Board Thickness R1 1.15 7 (2X) 4.667 (2X) 2.333 (2X) ) PLCS R1 (4 2.05 0.35 R1.50 (24PLCS) 2.333 (2X) 7 (2X) 3.6mm x 45 CHAMFER 4.667 (2X) 1.35 (2X) R0.75 12.
PAGE 16
Relative Spectral Distribution vs. Wavelength Characteristics LXK8-PWxx-xxxx at Test Current, Junction Temperature = 85°C Figure 8. Color spectrum of LXK8-PWxx-xxxx product, integrated measurement. LXK0-PR04-xxxx (Royal Blue) at Test Current, Junction Temperature = 85°C Figure 9. Color spectrum of LXK0-PR04-xxxx product, integrated measurement. DS102 LUXEON K Product Datasheet 20140625 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 17
Light Output Characteristics over Temperature All LUXEON K Products at Test Current, Normalized at Test Current, Junction Temperature = 85°C Figure 10. Typical relative flux vs. junction temperature at test current. DS102 LUXEON K Product Datasheet 20140625 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 18
Typical Forward Current Characteristics Typical Forward Current vs. Forward Voltage LUXEON K 3-up Products, Junction Temperature = 85°C Figure 11. Forward current vs. forward voltage for LXKx-Pxxx-x403 products. Typical Forward Current vs. Forward Voltage LUXEON K 4-up Products, Junction Temperature = 85°C Figure 12. Forward current vs. forward voltage for LXKx-Pxxx-0004(A) products. Note for Figure 12: 1. LUXEON LXKx-Pxxx-0004(A) is single junction product.
PAGE 19
Typical Forward Current vs. Forward Voltage LUXEON K 4-up High-Voltage Products, Junction Temperature = 85°C Figure 13. Forward current vs. forward voltage for LXKx-Pxxx-x404 products. Typical Forward Current vs. Forward Voltage LUXEON K 6-up High-Voltage Products, Junction Temperature = 85°C Figure 14. Forward current vs. forward voltage for LXKx-Pxxx-x206 products. DS102 LUXEON K Product Datasheet 20140625 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 20
Typical Forward Current vs. Forward Voltage LUXEON K 8-up Products, Junction Temperature = 85°C Figure 15. Forward current vs. forward voltage for LXKx-Pxxx-xxx8(A) products. Typical Forward Current vs. Forward Voltage LUXEON K 12-up Products, Junction Temperature = 85°C Figure 16. Forward current vs. forward voltage for LXKx-Pxxx-xx12(A) products. DS102 LUXEON K Product Datasheet 20140625 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 21
Typical Forward Current vs. Forward Voltage LUXEON K 16-up Products, Junction Temperature = 85°C Figure 17. Forward current vs. forward voltage for LXKx-Pxxx-xx16(A) products. Typical Forward Current vs. Forward Voltage LUXEON K 24-up Products, Junction Temperature = 85°C Figure 18. Forward current vs. forward voltage for LXKx-Pxxx-xx24(A) products. DS102 LUXEON K Product Datasheet 20140625 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 22
Typical Relative Luminous Flus vs. Forward Current for ALL LUXEON K Product Configurations Without Multi-Junction Die, Junction Temperature 85°C Figure 19. Typical relative luminous flux vs. forward current. Typical Relative Luminous Flus vs. Forward Current for ALL LUXEON K Product 1.2 Configurations With Multi-Junction Die, Junction Temperature 85°C R J-AIR = 2°C/W Maximum DC D Forward Current (A) 1.0 R J-AIR = 4°C/W R J-AIR = 6°C/W R J-AIR = 8°C/W R J-AIR = 10°C/W 0.8 0.6 0.4 0.2 0.
PAGE 23
Typical Relative Luminous Flus vs. Forward Current for LUXEON K LXKx-PWxx-0403/LXKx-PWxx-0404 Product Configurations With Multi-Junction Die, Junction Temperature 85°C Figure 21. Typical relative luminous flux vs. forward current for LUXEON K (LXKx-PWxx-0403/LXKx-PWxx-0404) with multi-junction die. DS102 LUXEON K Product Datasheet 20140625 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 24
Typical Radiation Patterns Typical Spatial Radiation Pattern for LUXEON K 120 Relative Intensity (%) 100 80 60 40 20 0 -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement (degrees) Figure 22. Typical representative spatial radiation pattern for LUXEON K. Packaging on Trays LUXEON K products will be securely packaged in trays. Table 8. Part Number Tray Dimensions Quantity per Tray Number of Trays per Box LXKx-Pxxx-xxx3 LXKx-Pxxx-xxx4(A) 315mm width x 135.
PAGE 25
Tray Dimensions – LXKx-Pxxx-xxx3 and LXKx-Pxxx-xxx4(A) Figure 23. Tray Dimensions – LXKx-Pxxx-xxx6 and LXKx-Pxxx-xxx8(A) Figure 24. DS102 LUXEON K Product Datasheet 20140625 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 26
Tray Dimensions – LXKx-Pxxx-xx12(A) and LXKx-Pxxx-xx16(A) Figure 25. Tray Dimensions – LXKx-Pxxx-xx24(A) Figure 26. DS102 LUXEON K Product Datasheet 20140625 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 27
LUXEON K White ANSI Color Bin Definition 0.440 2700K ANSI 3000K ANSI 0.420 Blackbody Locus 3500K ANSI 4000K ANSI CIE E 1931 y 0.400 0.380 5000K ANSI 0.360 2700K 3-step MacAdams Ellipse 3000K 3-step MacAdams Ellipse 0.340 3500K 3-step MacAdams Ellipse 4000K 3-step MacAdams Ellipse 0.320 0.320 5000K 3-step MacAdams Ellipse 0.340 0.360 0.380 0.400 0.420 0.440 0.460 0.480 0.500 CIE 1931 x Figure 27. Graph of LUXEON K ANSI bin color definition. Table 9.
PAGE 28
About Lumileds Lumileds is the light engine leader, delivering innovation, quality, and reliability. For 100 years, Lumileds commitment to innovation has helped customers pioneer breakthrough products in the automotive, consumer and illumination markets. Lumileds is shaping the future of light with our LEDs and automotive lamps, and helping our customers illuminate how people see the world around them. To learn more about our portfolio of light engines visit www.lumileds.com. ©2015 Lumileds Holding B.V.