Datasheet
DS101 LUXEON R Product Datasheet 20140709 ©2015 Lumileds Holding B.V. All rights reserved. 2
General Information
Product Nomenclature
LUXEON R emitters are tested and binned “hot” under conditions comparable to those found in “real-world” lighting
products. The test conditions for LUXEON R are 700mA D.C. with junction temperature at 85°C.
The part number designation for the LUXEON R emitters is explained as follows:
L X A 7 - P W x x
Where:
7 — designates minimum CRI performance (value 7 = 70 minimum)
P — designates radiation pattern (value P for Lambertian)
W — designates color (value W = White)
xx — designates nominal ANSI CCT (value 30 = 3000K, 40 = 4000K, 50 = 5000K, 57 = 5700K, and 65 =
6500K)
Lumen Maintenance
LUXEON R products are tested in compliance with LM-80. Please visit www.lumileds.com or contact your local
Lumileds Technical Solutions Manager for TM-21 extrapolations or other support.
Environmental Compliance
Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON R
is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,
namely the RoHS and REACH directives. Lumileds will not intentionally add the following restricted materials to the
LUXEON R: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE).