Datasheet
DS107 LUXEON Rebel PLUS Product Datasheet 20140930 ©2015 Lumileds Holding B.V. All rights reserved. 13
Product Binning and Labeling
Purpose of Product Binning
In the manufacturing of semiconductor products, there is a variation of performance around the average values
given in the technical data sheets. For this reason, Lumileds bins the LED components for luminous ux and forward
voltage (V
f
). Color is oered in a single 3-step or 5-step MacAdam ellipse color space centered on the ANSI CCT
color bins. For additional information please review the MacAdam ellipse technical denition section.
Decoding Product Bin Labeling
LUXEON Rebel PLUS emitters are labeled using a four digit alphanumeric code (CAT code) depicting the bin
values for emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable
bin combination. Using these codes, it is possible to determine optimum mixing and matching of products for
consistency in a given application.
Reels of LUXEON Rebel PLUS emitters are labeled with a three digit alphanumeric CAT code following the format
below.
A B C D
A = Flux bins (A, B, C, D, E, F,G)
B and C = Color Bins (13, 1A, 1B, 1C, 1D)
D = Voltage Bins (1, 2)
A B C D
Flux Bin CRI Color Bin Vf min max
see ux bin table 1 80 CRI min 3 3-step 1 2.50V 2.75V
A
5-step
2 2.75V 3.00V
B
C
D