Datasheet

DS107 LUXEON Rebel PLUS Product Datasheet 20140930 ©2015 Lumileds Holding B.V. All rights reserved. 3
Product Selection & Optical Characteristics
Product Selection Guide for LUXEON Rebel PLUS Emitters
Junction Temperature = 85°C
Table 1.
Part
Number
Nominal
ANSI
CCT
Performance @ 350mA Test Current
Typ. Luminous Flux
(lm)
Typ. Forward Voltage
(V)
Typ. Ecacy (lm/W)
CRI
Min
Min
Luminous
Flux (lm)
Test
Condition °C
350mA 700mA 350mA 700mA 350mA 700mA
LX18-P127-Y 2700K 80 80 85 85 156 2.76 2.85 88 78
LX18-P130-Y 3000K 80 85 85 95 166 2.76 2.85 98 83
LX18-P135-Y 3500K 80 90 85 98 172 2.76 2.85 101 86
LX18-P140-Y 4000K 80 90 85 103 180 2.76 2.85 107 90
LX18-P150-Y 5000K 80 95 85 106 186 2.76 2.85 110 93
Notes for Table 1:
1. Minimum luminous ux performance within published operating conditions. Lumileds maintains a tolerance of ±6.5% on luminous ux measurments and ±2 on CRI measurements.
2. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
Optical Characteristics
LUXEON Rebel PLUS at Test Current
[1]
, Junction Temperature = 85°C
Table 2.
Nominal
CCT
Part Number
Color Temperature
[2]
CCT
Typical
Typ Total Included Angle
[2]
(degrees) u
0.90V
Typ Viewing Angle
[3]
(degrees) 2u 1/2
2700K LX18-P127-Y 2725K 160 120
3000K LX18-P130-Y 3045K 160 120
3500K LX18-P135-Y 3465K 160 120
4000K LX18-P140-Y 3985K 160 120
5000K LX18-P150-Y 5028K 160 120
Notes for Table 2:
1. Test current is 350mA D.C. for all LX18-P1xx emitters.
2. Total angle at which 90% of total luminous ux is captured.
3. Viewing angle is the o axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value.