Datasheet

ManualsBrandsLUMILEDS ManualsHighPower-LEDsHighPower LED Cold white 127 lm 135 ° 2.81 V 1050 mA

General IllumInatIon

RoHS

COMPLIANT

LUXEON Q delivers superior performance in a high-power LED that

serves as a drop-in replacement for products that use the standard 3535

surface mount package. LUXEON Q is the rst high-power LED based

on the Lumileds FlipChip Technology chip-scale package (CSP) device

architecture. LUXEON Q takes advantage of a fully developed ecosystem

for 3535 components, including optics, to speed the time-to-market for

indoor and outdoor luminaires.

luXeon Q

Standard ceramic 3535 footprint delivering

high ecacy at high-drive current

Features and BeneFIts PrImary aPPlIcatIons

Industry standard 3535 package for optimization with existing designs Architectural

Lumileds FlipChip Technology for industry leading performance Downlights

High ecacy at high drive current enables high lumen and lm/$ at high lm/W High Bay & Low Bay

3-step MacAdam ellipse color denition: Freedom from Binning for color

consistency

Lamps

UL-recognized component [E352519] Outdoor

Specialty Lighting

Summary of content (18 pages)

PAGE 1
General Illumination LUXEON Q Standard ceramic 3535 footprint delivering high efficacy at high-drive current LUXEON Q delivers superior performance in a high-power LED that serves as a drop-in replacement for products that use the standard 3535 surface mount package. LUXEON Q is the first high-power LED based on the Lumileds FlipChip Technology chip-scale package (CSP) device architecture.
PAGE 2
Table of Contents General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
General Information Product Nomenclature LUXEON Q emitters are specified and binned “hot” under conditions comparable to those found in “real-world” lighting products. The test conditions for LUXEON Q are 350mA DC with junction temperature at 85°C.
PAGE 4
Product Selection & Optical Characteristics Product Selection Guide for LUXEON Q Emitters Junction Temperature = 85°C Table 1. Typical Performance Characteristics at 350mA, 700mA, and 1000mA for LUXEON Q, Junction Temperature = 85°C Luminous Flux (Lm) Min Typical Luminous Flux (Lm) 350 700 1000 mA mA mA 113 199 261 Typical Forward Voltage (Vf) 350 700 1000 mA mA mA 2.81 2.93 2.
PAGE 5
Electrical Characteristics Electrical Characteristics at test current for LUXEON Q Junction Temperature = 85°C Table 3. Forward Voltage Vf (V) [1] Nominal ANSI CCT Typical Temperature Coefficient of Forward Voltage [2] (mV/°C) DVF / DTJ Typical Thermal Resistance Junction to Thermal Pad (°C/W) Rθ J-C Minimum Maximum 2700K 2.50 3.25 -1.6 7 3000K 2.50 3.25 -1.6 7 3500K 2.50 3.25 -1.6 7 4000K 2.50 3.25 -1.6 7 5000K 2.50 3.25 -1.6 7 5700K 2.50 3.25 -1.6 7 Notes for Table 3: 1.
PAGE 6
JEDEC Moisture Sensitivity Table 5. 1 Soak Requirements Standard Floor Life Level Time Conditions Time Conditions unlimited 30°C / 85% RH 168h +5/-0 85°C / 85% RH Reflow Soldering Characteristics Figure 1. Temperature Profile for Table 6. Table 6.
PAGE 7
Mechanical Dimensions Figure 2. Package outline drawing for LUXEON Q. Notes for Figure 2: 1. Drawings not to scale. 2. All dimensions are in millimeters. 3. The thermal pad is electrically isolated from the anode and cathode contact pads. 4. Do not handle the device by the lens. Excessive force on the lens may damage the lens itself or the interior of the device. 5. Tolerances (UNLESS OTHERWISE SPECIFIED) -- LINEAR: ANGULAR: -- XX. ± 0.
PAGE 8
Solder Pad Design Figure 3. Solder pad layout. Notes for Figure 3: • The photograph shows the recommended LUXEON Q layout on Printed Circuit Board (PCB). • For more information on assembly and layout, please refer to Application Brief 118 (AB118). • The .dwg files are available at www.lumileds.com. DS118 LUXEON Q Product Datasheet 20141120 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 9
Relative Spectral Distribution vs. Wavelength Characteristics Relative Spectra at Test Current, Junction Temperature = 85°C Figure 4. Color Spectrum of L1Q0-xx8000000zzz0. Figure 5. Color Spectrum of L1Q0-xx7000000zzz0. DS118 LUXEON Q Product Datasheet 20141120 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 10
Typical Light Output Characteristics Relative Light Output vs. Junction Temperature, Test Current = 350mA Figure 6. Relative light output vs. junction temperature, L1Q0-xxyy00000zzz0. Relative Light Output vs. Forward Current, Junction Temperature = 85°C Figure 7. Typical relative luminous flux vs. forward current, L1Q0-xxyy00000zzz0. DS118 LUXEON Q Product Datasheet 20141120 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 11
Typical Forward Current Characteristics Forward Current vs. Forward Voltage Junction Temperature = 85°C Figure 8. Typical forward current vs. forward voltage, L1Q0-xxyy00000zzz0. DS118 LUXEON Q Product Datasheet 20141120 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 12
Typical Radiation Patterns Typical Spatial Radiation Pattern Figure 9. Typical representative spatial radiation pattern for L1Q0-xxyy00000zzz0. Typical Polar Radiation Pattern Figure 10. Typical representative polar radiation pattern for L1Q0-xxyy00000zzz0. DS118 LUXEON Q Product Datasheet 20141120 ©2015 Lumileds Holding B.V. All rights reserved.
PAGE 15
Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical data sheets. For this reason, Lumileds bins the LED components for luminous flux and forward voltage (Vf ). Color is offered in a single 3-step or 5-step MacAdam ellipse color space centered on the ANSI CCT color bins. For additional information please review the MacAdam ellipse technical definition section.
PAGE 16
Luminous Flux and Forward Voltage Bins Table 7 lists the standard photometric luminous flux bins for LUXEON Q emitters (tested and binned at 350mA and Tj = 85°C). Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. Table 7.
PAGE 17
LUXEON Q 3-step and 5-step MacAdam ellipse Color Definition Note: Color bin space illustration for 2700K, 3000K, and 3500K. For CCTs 4000K and above the ellipse centers are all above the blackbody line. 0.430 0.420 AC AB 5B 3U 5C 0.410 3L 5A 0.400 5D AD AA 485 Color Space Definition for above and below blackbody 480 475 470 460 455 450 445 440 435 0.380 465 ANSI C78.377-2008 3-step MacAdam ellipse 5-step MacAdam ellipse BBL "Quadrant" lines 0.
PAGE 18
About Lumileds Lumileds is the light engine leader, delivering innovation, quality, and reliability. For 100 years, Lumileds commitment to innovation has helped customers pioneer breakthrough products in the automotive, consumer and illumination markets. Lumileds is shaping the future of light with our LEDs and automotive lamps, and helping our customers illuminate how people see the world around them. To learn more about our portfolio of light engines visit www.lumileds.com. ©2015 Lumileds Holding B.V.