Datasheet

Outline Drawings Selection Guide
Table 1
Total Included
Total Flux
ΦΦ
V
(LM) Angle
θθ
90V
@ 70 mA
[1]
(Degrees)
[2]
Device Type LED Color Typ. Typ.
HPWAMH02 AS AlInGaP RedOrange 2.0 95
HPWADH02 75
HPWTRD02 44 X 88
HPWTMD02 TS AlInGaP Red 3.8 100
HPWTDD02 70
HPWTBD02 50
HPWTRH02 44 X 88
HPWTMH02 TS AlInGaP RedOrange 5.0 100
HPWTDH02 70
HPWTBH02 50
HPWTRL02 44 X 88
HPWTML02 TS AlInGaP Amber 2.5 100
HPWTDL02 70
HPWTBL02 50
Notes:
1.Φv is the total luminous flux output as measured with
an integrating sphere after the device has stabilized.
(R
θ
JA
= 200°C/W, T
A
= 25ºC)
2.θ
0.90 V
is the included angle at which 90% of the total
luminous flux is captured.
Absolute Maximum Ratings at
T
A
= 25ºC
Table 2
Parameter HPWA HPWT Units
DC Forward Current
[1]
70 70 mA
Power Dissipation 187 221 mW
Reverse Voltage (IR = 100 mA) 10 10 V
Operating Temperature Range 40 to +100 ºC
Storage Temperature Range 55 to +100 ºC
High Temperature Chamber 125ºC, 2 Hours
LED Junction Temperature 125ºC
Solder Conditions
[2]
Preheat Temperature 85 +/ 15°C, 70 sec +/ 20 sec
Solder Temperature 250 +/ 5°C, 2.5 +/ 0.5 sec
[1.5mm (0.06 in) below seating plane]
Notes:
1. Derate as shown in Figures 4a and 4b.
2. See "Recommended Soldering Conditions", Page 8.
LeadFree SuperFlux LEDs Datasheet DS55 (6/06)
2