Datasheet

ManualsBrandsLUMILEDS - LIGHTS FROM SILICON VALLEY ManualsLEDs & AccessoriesLED wired Amber Rectangular 7.6 x 7.6 mm 70 ° 70 mA 2.6 V

Technical Datasheet DS55

Introduction

This revolutionary package design allows the lighting designer to

reduce the number of LEDs required and provide a more uniform

and unique illuminated appearance than with other LED solutions.

This is possible through the efficient optical package design and

highcurrent capabilities.

The low profile package can be easily coupled with reflectors or

lenses to efficiently distribute light and provide the desired lit

appearance. This product family employs red, redorange and amber

LED materials, which allow designers to match the color of many

lighting applications like vehicle signal lamps, specialty lighting, and

electronic signs.

SuperFlux LEDs

LeadFree

Key Benefits



Rugged Lighting Products



Electricity Savings



Maintenance Savings

Features



LeadFree



RoHS Compliant



High Luminance



Uniform Color



Low Power Consumption



Low Thermal Resistance



Low Profile



Meets SAE/ECE/JIS

Automotive Color

Requirements



Packaged in tubes for use with

automatic insertion equipment

Typical

Applications



Automotive Exterior Lighting



Electronic Signs and Signals



Specialty Lighting

HPWAMH02

HPWTMH02

HPWADH02

HPWTDH02

HPWTRD02

HPWTBH02

HPWTMD02

HPWTRL02

HPWTDD02

HPWTML02

HPWTBD02

HPWTDL02

HPWTRH02

HPWTBL02

Summary of content (9 pages)

PAGE 1
Technical Datasheet DS55 Lead Free SuperFlux LEDs Introduction This revolutionary package design allows the lighting designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical package design and high current capabilities.
PAGE 2
Outline Drawings Selection Guide Table 1 Total Included @ 70 mA[1] Angle θ90V (Degrees) [2] Typ. Total Flux ΦV (LM) Device Type LED Color Typ. HPWA MH02 AS AlInGaP Red Orange 2.0 95 HPWA DH02 75 HPWT RD02 44 X 88 HPWT MD02 TS AlInGaP Red 3.8 100 HPWT DD02 70 HPWT BD02 50 HPWT RH02 44 X 88 HPWT MH02 TS AlInGaP Red Orange 5.0 100 HPWT DH02 70 HPWT BH02 50 HPWT RL02 44 X 88 HPWT ML02 TS AlInGaP Amber 2.5 100 HPWT DL02 70 HPWT BL02 50 Notes: 1.
PAGE 3
Optical Characteristics at TA = 25°C, IF = 70 mA, RθJ A = 200°C/W Electrical Characteristics at TA=25°C Table 4 Forward Voltage Reverse VF (Volts) Breakdown Capacitance Thermal @ VR (Volts)[1] C (pF) Resistance Speed of IF = 70mA (HPWA, @ IR = 100 VF = 0, RθJ PIN Response HPWT) μA F = 1MHz. (°C/W) τs (ns) [2] Table 3 Total Device Type HPWA MH02 Luminous Peak Dominant Included Intensity/ Viewing Wavelength Wavelength Angle θ0.
PAGE 4
Part Number Selection Red Part Number HPWT RD02 00000 HPWT RD02 D4000 HPWT RD02 E4000 HPWT RD02 F4000 HPWT BD02 00000 HPWT BD02 D4000 HPWT BD02 E4000 HPWT BD02 F4000 HPWT DD02 00000 HPWT DD02 D4000 HPWT DD02 E4000 HPWT DD02 F4000 HPWT MD02 00000 HPWT MD02 D4000 HPWT MD02 E4000 HPWT MD02 F4000 Viewing Angle θ1/2 (Degrees) 25 25 25 25 X 68 X 68 X 68 X 68 30 30 30 30 40 40 40 40 70 70 70 70 Min. Flux[1] Φv (lm) 1.5 2.0 2.5 3.0 1.5 2.0 2.5 3.0 1.5 2.0 2.5 3.0 1.5 2.0 2.5 3.0 Max Flux Φv (lm) 4.8 6.1 7.3 4.
PAGE 5
Red Orange Part Number HPWT RH02 00000 HPWT RH02 D4000 HPWT RH02 E4000 HPWT RH02 F4000 HPWT RH02 G4000 HPWT RH02 H4000 HPWT BH02 00000 HPWT BH02 D4000 HPWT BH02 E4000 HPWT BH02 F4000 HPWT BH02 G4000 HPWT BH02 H4000 HPWT DH02 00000 HPWT DH02 D4000 HPWT DH02 E4000 HPWT DH02 F4000 HPWT DH02 G4000 HPWT DH02 H4000 HPWT MH02 00000 HPWT MH02 D4000 HPWT MH02 E4000 HPWT MH02 F4000 HPWT MH02 G4000 HPWT MH02 H4000 HPWA MH02 B4000 HPWA DH02 B4000 HPWA MH02 C4000 HPWA DH02 C4000 Viewing Angle θ1/2 (Degrees) 25 25 25 25
PAGE 6
Figures1 HPWA-XL02 HPWA-XH02 HPWT-XL02 HPWT-XH02 HPWT-XD02 Figure 3. HPWA/HPWT xx02 Relative Luminous Flux Figure 1a. Relative Intensity vs. Wavelength vs. Forward Current. MAXIMUM DC CURRENT (mA) 70 FORWARD CURRENT (mA) 70 60 HPWT 50 HPWA 40 30 60 50 Rth(j-a) = 300 C/W Rth(j-a) = 400 C/W 40 Rth(j-a) = 500 C/W Rth(j-a) = 600 C/W 30 20 10 0 20 0 20 40 60 80 100 AMBIENT TEMPERATURE (C) 10 Figure 4a. HPWA xx02 Maximum DC Forward Current 0 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.
PAGE 7
Figure 5a. HPWT Rx02 Relative Luminous Intensity vs. Figure 5d. HPWA(T) Dx02 Relative Luminous Intensity Off Axis Angle. vs. Off Axis Angle. Figure 5b. HPWA Mx02 Relative Luminous Intensity Figure 5e. HPWT Bx02 Relative Luminous Intensity vs. Off Axis Angle. vs. Off Axis Angle. Figure 5c. HPWT Mx02 Relative Luminous Intensity vs. Off Axis Angle. 1. All Figures Typical unless indicated as Maximum.
PAGE 8
Recommended Soldering Conditions for Pb Free SuperFlux 300 Peak o 255 C Temperature (deg C) 250 o 217 C 200 Preheat 90 s (MAX) 100 oC (MAX) 150 100 50 0 0 10 20 30 40 50 Time (Seconds) 60 70 80 90 Solder Conditions Preheat Temperatue 85 +/ 15ºC Preheat Time 70s +/ 20s Peak Profile Temperature 250 +/ 5ºC Solder Time Above 217ºC 2.5 +/ 0.5s Note: 1.All top preheat stages are to be turned off so that the lamp body is not directly exposed to the heat source. 2.
PAGE 9
Company Information LUXEON®, SuperFlux and SnapLED are developed, manufactured and marketed by Philips Lumileds Lighting Company. Philips Lumileds is a world class supplier of Light Emitting Diodes (LEDs) producing billions of LEDs annually. Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors (Red, Green, Blue) and White.