LUMIGON T3 • Quick Start Guide • Safety Guide • Warranty • End-User License Agreement English
Contents Quick Start Guide 7 Safety Guide 15 Warranty Terms and Conditions 33 End-User License Agreement 41 Other Legal Information 47 Copyright © 2016 Lumigon A/S - All rights reserved 1
Dear Customer, Inside the box Thank you for buying a T3 smartphone created by Lumigon in Denmark. You should find the following items in the sales box: For more information on using your phone and its features, please refer to our user manual and other online resources available from the Support section of our web page at www.lumigon.com/support. If you don’t find the information you are looking for, you can contact our Support team by e-mail at support@lumigon.com.
T3 overview 1 5 11 2 12 13 3 14 4 15 6 7 20 8 9 10 21 16 22 17 12 23 4 18 24 Copyright © 2016 Lumigon A/S - All rights reserved 1. Speaker (top) 14. Front camera flash 2. Power key 15. 3. Infrared transmitter/ receiver 2.4 megapixel front camera 16. Active area 4. Audio jack connector (3.5 mm) 17. Menu key 18. Home key with fingerprint reader 19. Back key 5. Noise cancellation microphone 6. 13 megapixel back camera 20. Volume / Zoom keys 7.
Quick Start Guide 6 Copyright © 2016 Lumigon A/S - All rights reserved Copyright © 2016 Lumigon A/S - All rights reserved 7
Insert SIM card SIM 1 SIM 2 Place your nano SIM card into the SIM card tray 1 with gold contracts facing down. If you use two SIM cards, place your secondary nano SIM card into the SIM card tray 2. With your fingernails of your thumb and index finger gently pull out the SIM card tray. 8 Copyright © 2016 Lumigon A/S - All rights reserved NOTE: T3 is only compatible with nano SIM cards. Any other incompatible or modified SIM cards can damage the SIM card, its data and the phone itself.
Charge the phone using the USB charger NOTE: It takes 1.5-2 hours to fully charge the phone. To insert the SIM card tray back into the phone make sure the tray is positioned correctly, then carefully push it all the way in. Make sure the tray is inserted properly. 10 Copyright © 2016 Lumigon A/S - All rights reserved 1. Plug the charger into a power outlet. 2. Plug the end of the charger cable into the micro USB port of the phone (the USB sign on the head of the cable facing up).
Turn on Phone Follow the onscreen instructions 1. When you turn on your phone for the first time, you’ll see a Welcome screen. Select your language, and touch “Start”. 2. Follow the onscreen instructions to set up your phone. 3. When prompted, sign in with your Google™ Account. If you don’t have an account, you can create one directly on your phone. By signing in with your Google Account you can synchronize your e-mail, contacts, calendar events and other data associated with that account on your phone.
Safety Guide 14 Copyright © 2016 Lumigon A/S - All rights reserved
READ THIS BEFORE YOU PROCEED Safety information and precautions Please read these safety guidelines carefully and make sure to observe them to ensure proper and safe use of the phone.
The phone can be charged by either using the supplied USB power adaptor and USB cable or by using the supplied USB cable and a computer. The charger type is A70-502000, output 5V/2A current is (Vdc/A). The plug considered as disconnect device of adapter. TO AVOID ELECTRIC SHOCK, FIRE AND INJURY: • DO NOT use damaged power cords, USB cables, power adaptors, or loose electrical sockets. • DO NOT use unauthorized power adaptors or USB cables with your phone.
• DO NOT hold the phone close to your ears when using hands-free speaker. Interference with hearing aids Some mobile phones may cause radio-frequency interference with hearing aids, so the user hears high-pitched whistling sounds, buzzes, or static. In the event of such interference, you may want to consult your service provider, or call the customer service to discuss alternatives.
You can still use some of the phone’s features if you switch to Airplane Mode. Always follow the aircraft crew’s instructions on the use of mobile phones when onboard. Interference with medical equipment Always turn OFF your phone in hospitals and health-care facilities when you are instructed to do so. This phone contains radio transmitters and receivers that enable it to receive and transmit radio-frequency (RF) energy.
Safety precautions for radio-frequency (RF) exposure The phone contains a radio transmitter and receiver. When it is on, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits. The radiated output power is far below the international radiofrequency exposure limits that are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
Specific Absorption Rate (SAR) Radio-frequency exposure limits for mobile phone users are given in terms of Specific Absorption Rate (SAR) – the rate of absorption of radio-frequency energy per unit mass of the body. This phone has been tested according to the international guidelines for the limits for exposure to radio waves and was found to be in compliance with these. According to the EU standards for mobile phones, the SAR limit is 2.0 W/kg.
Avoid excessive pressure on the phone • Avoid excessive pressure on the screen and the phone to prevent damaging them. • Remove the phone from your pants’ pocket before sitting down. • We recommend that you store the phone in a protective case and only use your finger when interacting with the touch screen. NOTE: A screen that cracks as a result of improper handling is not covered by the warranty. Phone getting warm after prolonged use When you use the phone for prolonged periods of time, e.g.
• The phone does not operate normally and/or exhibits a distinct change in performance even though you follow the operating instructions. Hot areas and heat sources • Keep the phone away from heat sources such as radiators, stoves, microwaves, and the like. • Do NOT expose the phone to direct sunlight. • The suitable temperature range for using the phone and its accessories is 0°C to 40°C. Water and dust resistance The phone is manufactured to be resistant to low-pressure water and dust.
• DO NOT allow small children to play with the phone and its accessories - they could hurt themselves or others, or could accidentally damage the phone. • The phone contains small parts with sharp edges that may cause injury or that may be detached from the phone and pose a choking hazard. Risk of repetitive strain injuries (RSI) To minimize the risk of RSI, when using the phone for extended periods of time: • Hold the phone with a relaxed grip. • Press the buttons lightly.
Lumigon’s Limited Warranty Warranty terms & conditions 1. Subject to the warranty terms and conditions specified in this Limited Warranty, Lumigon warrants this Lumigon product (the “Product”) as free of defects in design, materials and workmanship at the time of its original purchase. 2.
of the original Warranty Period or for three (3) months from the date of repair or replacement, whichever is longer. 9. Lumigon shall not be responsible for the damage to or loss of the Customer’s SIM cards, any programs, data, or removable storage media. The Customer shall be solely responsible for backing up his/her data and for removing SIM cards, removable storage media, and any confidential, proprietary, or personal information from the Product before returning it for repair. 10.
12. In the event of Product failure, the Customer should take the following actions: i. Refer to the user manual available from Lumigon’s website www.lumigon.com/support or other Product documentation or online resources on usage or maintenance provided by Lumigon in order to identify and, if possible, fix the problem. ii.
moisture and extremely high or low temperatures. Please refer to the Safety Guide section in this leaflet to learn more about the device’s IP rating as well as proper use. Please note that the waterproof ability of the micro USB port and the headset jack is not guaranteed in all environments or conditions. Normal wear and tear along with damage to your device can reduce its ability to resist dust or moisture. If liquid is detected inside the device, your warranty will be void.
Lumigon’s End-User License Agreement for Software PLEASE READ THIS CAREFULLY BEFORE USING THE SOFTWARE INCLUDED WITH OR ACCESSIBLE THROUGH YOUR LUMIGON PRODUCT. This End-User License Agreement (“EULA”) is a legal agreement between you, the end user (either an individual or an entity), and Lumigon A/S and its suppliers and licensors (collectively referred to as “Lumigon”) for all the relevant software included with or accessible through your Lumigon Product (“Software”).
after repair or replacement. Any other copies you make of the Software are in violation of this EULA); v. remove any proprietary notices or labels on the Software or Documentation; or vi. add, integrate or combine any other software with the Software. Any such forbidden use shall immediately terminate your license to use the Software. 2.
6.2 LUMIGON’S TOTAL LIABILITY FOR ANY DAMAGES UNDER THIS AGREEMENT SHALL NEVER EXCEED THE PURCHASE PRICE YOU PAID FOR THE LUMIGON PRODUCT IN QUESTION. Other Legal Information 6.3 Any software is not fault tolerant, whether provided by Lumigon or a third party. The Software is designed for systems that do not require fail-safe performance.
Limitation of damages WEEE statement TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL LUMIGON OR ITS AFFILIATES BE LIABLE TO YOU, ANY USER, OR THIRD PARTY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES OF ANY KIND, ARISING IN CONTRACT, TORT, OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF BUSINESS OPPORTUNITY, LOSS OF DATA, AND/OR LOSS OF PROFITS, REGARDLESS OF THE FORESEEABILITY THEREOF OR WHETHER LUMIGON OR ITS
