Quick start guide Lumigon T2
A full version of T2 user manual is available at www.lumigon.
Getting started To start using your smartphone you will need the following: • T2 smartphone • The original Lumigon battery that came with your phone • The original USB cable and power adaptor that came with your phone • A standard SIM card and an optional memory card (microSD card) IMPORTANT: To avoid damaging your phone, only use original Lumigon batteries and original USB cables with your phone.
1. Remove the back cover 1. With your fingernail open the back cover from the bottom of the phone. 2. Lift the back cover up and gently push it out and away from the phone.
2. Insert the SIM and microSD cards 1. Gently insert the SIM card into its slot (cut-off corner first and gold contacts facing down). 2. Gently insert the microSD card into its slot (gold contacts facing down).
3. Insert the battery Insert the battery as shown in the illustration (Lumigon logo facing up).
4. Attach the back cover 1. Attach the top of the back cover at the top of the phone. 2. Press the back cover into place all the way down towards the bottom of the phone. Make sure all edges get attached tightly.
5. Charge the battery 1. Plug the original USB cable into the micro USB connector. 2. Plug the other end of the USB cable into the charger and plug it into a power outlet (charging time 1.5-2 hours) OR plug the USB cable into a computer (charging time 2-3 hours).
6. Turn on the phone 1. Press and hold down the Power button for 2-3 seconds. 2. Wait for the Lumigon logo to appear on the screen. If the phone does not start, charge the battery and try again.
7. Follow the onscreen instructions 1. When you turn on your phone for the first time, you will see a welcome screen. Select your language, and touch Start. 2. A series of screens will take you through the easy setup process including signing in to your Google Account. If you don’t have a Google Account, you can create one right away.
9
