Operation Manual

LUMIGON T2 USER MANUAL - 234
12. Some buttons, e.g. Volume buttons, support repeating, meaning that when you press and hold the button, the
signal is transmitted repeatedly until you lift your finger.
To configure the Repeat setting if it is available for the button you are recording/editing, touch the field next to
Repeat and select between Disable, Slow, Normal or Fast.
13. Touch Save.
14. Repeat steps 8-12 for any other buttons/commands you want to record/edit.
15. When you are finished recording/editing commands for your remote, touch Close edit at the bottom.
Your remote control is now ready to be used.
You can create as many remote controls as you like. To make it easier to distinguish between your remote controls, make sure to name
them and choose different colors for the different remote controls.
The next time you open the Remote app, it will open the remote control you used last.
NAVIGATE BETWEEN YOUR REMOTE CONTROLS
Swipe left or right across the screen with your finger. The dots at the bottom indicate where you are in your
selection of remote controls.
CREATE A NEW REMOTE CONTROL
1. On a Home or All Apps screen, touch the Remote app icon .
2. Touch the Menu button.
3. Touch New remote.
4. Follow steps 3-13 in “Create your first remote control” above.