Operation Manual

LUMIGON T2 USER MANUAL - 233
1. On a Home or All Apps screen, touch the Remote app icon .
The first time you open the Remote app, you will see a welcome screen with a short
description of the app.
2. Touch Start to start configuring your remote control.
3. On the list that appears, select the type of the remote control you want to create (e.g.
TV, Mac, etc.).
4. Type the name of your remote control and location (e.g. Living room, Bedroom, etc.),
then choose a color for the remote.
5. Touch Create.
6. A quick guide consisting of a series of screens opens to help you set up your remote
control.
To navigate between the Help screens, touch the Next and Back buttons at
the bottom.
7. To close the Help screens, touch Close.
When you close the Help screens, your remote control opens in the Editing mode.
8. Touch a button of your remote control on the screen whose command you want to
record/edit.
9. If you want, change the name of the button.
10. Touch to record a command from your existing IR remote control that
you want to assign to this button.
NOTE: You can also choose a command from the preset or previously recorded
commands by touching .
11. An onscreen guide will guide you through the recording process – just follow the instructions on the screen.
If you experience problems with recording a command, try adjusting the position of your remote control and/or the
distance between the phone and the remote control.
NOTE: Not all types of remote controls are supported by the Remote app.