Product Manual

330 Pr
eferred Care
®
Recliner Operating Instr
uctions
44
1 Remove recliner back and base unit from cotton. Remove
thumb screws from two recliner mechanism uprights.
2 Open velcro panel at lower half of the chair back (Fig 1).
3 Locate brackets on each side of backrest and slide backrest
(in vertical movement) onto the two recliner uprights. Be sure
the uprights are fully inserted into the brackets. Replace the
thumb screws onto the recliner uprights to secure the
backrest onto the mechanism.
4 Tightly close velcro panel.
5 Chair is now ready for use.
ASSEMBLY INSTRUCTIONS
OPERATING INSTRUCTIONS
Armrest
1. To raise armrest lift up on central portion of armrest until
locking pin on armrest locks.
2. To lower armrest, lift slightly on arm to disengage pull pin.
Push armrest down while pin is pulled out.
Recliner
1. The standard model of this recliner has three positions that
can be achieved by leaning back in the unit while pushing
back on the armrest. IMPORTANT: Do not push chair into
reclining positions when chair is unoccupied or recliner
mechanism may be damaged.
2. To return unit to upright sitting position, pull forward on
armrest and push down on foot rest as you decrease your
pressure on the recliner's back.
If you ordered a recliner with modified Trendelenburg position:
3. The modified Trendelenburg position maybe obtained by
reclining one step past the third position. (See Fig 4). As a
safety feature, you must hold chair in the modified
Trendelenburg position. This is so that patients will not
accidentally go to this position and get stuck.
Figure 1
Figur
e 5
Figur
e 4
Figure 3
Figure 2