330 Preferred Care Recliner Operating Instructions 330-INS-LAB © Graham-Field Health Products 2005 IMPORTANT: READ THIS MANUAL BEFORE OPERATING YOUR ORTHO-BIOTIC PREFERRED CARE RECLINER
WARNINGS Warning: Read entire sheet before assembly or operation. Warning: Occupant weight should not exceed 250 lbs. Warning: Periodically inspect all parts and replace as needed. Warning: Casters must be locked at all times, except during transit. Warning: Do not use near open flame, as the chair may be a “combustion source”. Warning: Never stand on chair or transport anything other than a person.
RESIDENTIAL RECLINER The recliner has an interior & exterior frame design. The interior frame is welded steel (7/8" square tubing) on which the recliner hardware is mounted to. The exterior frame is made of a poplar (7/8" x 2 1/2") construction that is mounted to the outside of the Interior frame, with exposed upholstery sides. All vinyl material is made of a sulfide stain resistant naugahyde fabric. Foam & fabric material are flame retardant. locking, 2 non-locking).
ASSEMBLY INSTRUCTIONS 1 Remove recliner back and base unit from cotton. Remove thumb screws from two recliner mechanism uprights. 2 Open velcro panel at lower half of the chair back (Fig 1). 3 Locate brackets on each side of backrest and slide backrest (in vertical movement) onto the two recliner uprights. Be sure the uprights are fully inserted into the brackets. Replace the thumb screws onto the recliner uprights to secure the backrest onto the mechanism. Figure 1 4 Tightly close velcro panel.
U.S.A., Corporate Headquarters: Graham-Field Health Products 2935 Northeast Parkway Atlanta, Georgia 30360 telephone: 800-347-5678, 770-447-1609 fax: 800-726-0601, 678-291-3232 http://www.grahamfield.
