Product Manual

B700-INS-LAB-RevC10 9
HEAD
SECTION
FOOT
SECTION
head motor tube
clevis pin
circle cotter
mounting bracket
3. Carefully lower the head section to the oor, ensuring the head section rivets remain en-
gaged in the foot section hooks. Remove the clevis pin and circle cotter, shown above, from
the head section’s mounting brackets. Lift up the head motor tube and place it so that it
rests between the two brackets and the rst hole lines up with the bracket holes. Insert the
clevis pin and secure with the circle cotter, as shown above.
RIGHT AND LEFT
TRUSS ASSEMBLIES
slots on both ends of
truss assemblies
attach to shoulder bolts
on frame
bolt and nut to attach vertical
truss link to main frame comes
pre-assembled on truss assembly
large end
small end
The two truss assemblies, shown above, span the decks and give them more stability, much
like the trusses on a bridge. The trusses attach to the main frame via welded shoulder bolts
on either side of the head and foot sections.