Product Manual

B700-INS-LAB-RevC10 7
two shipping
cable ties —
cut and discard
head motor
tube
end of
head motor
tube
hook and loop strap
for storage (secured
with cable tie - do not cut)
FOOT
SECTION
cut cable ties
at both ends
and discard
two folded
truss assemblies
HEAD
SECTION
4 PREPARINGFORASSEMBLY
WARNING:Shippingcabletiesmustberemovedbeforeassembly.
REMOVESHIPPINGCABLETIESFROM
FOOTSECTIONHEADMOTORTUBE
Tools required: blade
1. The head motor tube is
secured to the foot section
with two cable ties for added
security during shipping, as
shown at right. Cut the two
cable ties and discard them.
2. The end of the head motor
tube is secured to the foot
section with a hook and loop
strap, as shown at right, to
secure it during moving and
storage when the bed is not
in use. The hook and loop
strap is attached to the head
motor tube with a cable tie.
Do not remove this cable
tie. When setting up the bed,
simply unstrap the hook and
loop strap from around the
deck tube and wrap it tightly
around the head motor tube,
then reinstall as shown at
right for moving or storage.
REMOVESHIPPINGCABLETIESFROM
HEADSECTIONTRUSSES
Tools required: blade
The two truss assemblies are
folded and secured to the head
section with two cable ties at
either end, as shown at right.
Cut and discard the cable ties
to detach the trusses before as-
sembly.