Product Manual

B700-INS-LAB-RevC10 23
CHECKHI/LODRIVESHAFTFORPROPERFUNCTIONALITY
1. Ensure the center spring button functions properly and locks both sections.
2. Inspect the connections at both head and foot ends for any wear or bends.
3. Inspect the entire length of the hi/lo drive shaft for any bends or stress damage.
CHECKCASTERSFORPROPEROPERATION
1. Ensure the locking casters are positioned at opposite ends diagonally.
2. Check the locking function on both locking casters, ensuring they work well and lock prop-
erly without restriction.
3. Check to ensure all casters roll freely without restriction when unlocked.
MECHANICALHARDWAREMAINTENANCE
Check all securing hardware (i.e. bolts, nuts, clevis pins, circle cotters) to ensure they are se-
cured and/or tightened properly.
CLEANINGTHEBED
WARNING:Unplugthebedfromtheelectricaloutletbeforeservicingor
cleaning.
CleaningtheMetalComponents
All metal parts of the bed have been covered with a baked-on epoxy coating.
1. To clean coated metal parts: Wipe with a clean, soft cloth dampened with mild detergent
and warm water.
2. To clean the mattress deck: Remove the mattress, then wipe mattress deck with a clean, soft
cloth dampened with mild detergent and warm water. Allow to air dry before replacing mat-
tress.
3. To remove dust from the frame: Carefully raise the head and foot sections of the bed and
wipe the frame with a clean, soft cloth.
CleaningthePendantHandController
Wipe the pendant hand controller with a clean, soft cloth dampened with mild detergent and
warm water. Air dry.
sNOTICE:Donotusecorrosiveorpowderedcleanserstocleanthependant
handcontroller.
sNOTICE:Donotimmerseorsoakthependanthandcontroller.