Product Manual

22 B700-INS-LAB-RevC10

8 MAINTENANCEANDSAFETY CHECKS

WARNING:Performthefollowingmaintenanceprogramtoassurethatthe

B700BariatricBedcontinuestooperatecorrectly.Performthesechecksat

leastonceayearandbetweenpatientplacements.

WARNING:DonottrytomodifytheBariatricbedinanyway.Unauthorized

modicationcouldchangethestructureofthebed,voidthewarranty,and

createahazardousconditionwhichcouldresultinseriouspersonalinjury.

WARNING:IfyouexperienceaproblemwiththeBariatricBedandareun-

abletoresolveityourself,pleasecontactyourGraham-Fieldequipmentpro-

vider.

CHECKELECTRONICSFREQUENTLY

1. Using the pendant, ensure all functions work properly and that each button performs the

appropriate function (see Bed Operation with Pendant Hand Controller).

2. Check all plugs and cables for damage, wear, and frayed wires, including:

• power cable

• head motor cable

• hi/lo motor cable

• foot motor cable

• pendant cable

WARNING:Donotusethebedifcablesorplugsaredamagedordefective.

Defectivecablesorplugscouldresultinreorelectricshock.

3. Ensure all wires are routed and attached properly to the bed frame with cable ties so that

they do not interfere with any moving parts.

4. Ensure all plugs are fully inserted and secured in the proper receptacles.

5. Ensure all hardware used to secure the control box is properly tightened.

CHECKBEDFRAMEANDSLEEPINGSURFACEFORSTABILITY

1. Visually check all the welds, ensuring that there are no stress cracks:

• check the head section

• check the foot section

• check the main frame

2. Check all joints between the sleeping surface sections for loose fasteners.

3. Inspect all center mounting rivets and latches to ensure they are not sheared off or bent.

4. Inspect all head and foot section surfaces for any bends, warping, or stress damage.

CHECKHEADANDFOOTBEDENDSFORSAFETYANDWEAR

1. Inspect the end panels and trim for any wear holes and/or sharp edges.

2. Inspect the corner locks and locking hardware for any wear, cracks, or stress damage.