Product Manual
20 B700-INS-LAB-RevC10
7 ASSEMBLINGANDINSTALLINGOPTIONAL
SWING-DOWN,QUICK-RELEASEHEADRAILS
The Bariatric Bed has the option of half rail installation on the head section. The rails mount on
brackets which have been pre-welded onto the head section. A quick-release system will allow
the caregiver to quickly remove or attach the rails as needed.
HEAD
SECTION
rail pivot arms
rail mounting tube
bracket pre-welded
to head section
angled end of
right half rail
999-0834-907G
straight end of
left half rail
999-0834-908G
hair pin clips
at end of clevis/
lanyard assemblies
999-0834-100
clevis pins at end of clevis/
lanyard assembly 999-0834-100
1. Align the rails so that the pivot arms face inward toward the bed and the straight ends of
the rails face the head end as shown above.
2. From the outside, insert the clevis end of the quick-release clevis/lanyard assembly through
the rail pivot arm holes, leaving the other end with hair pin clip hanging freely.
3. Insert the rails (with clevis pin) into the two holes in the tube mounting brackets on the
underside of the head section assembly as shown above.
4. From the inside, secure the clevis pins to the brackets using the other end of the clevis/lan-
yard assembly. Slide the hair pin clips through the small holes in the ends of the clevis pins.
Info: When ordering Head Rails for the B700 Bariatric Bed, order Kit # A8340.
Info: The hardware bag included in the rail kit contains both the quick-release clevis/
lanyard assembly to attach the rails to the B700 DC Bariatric Bed and the bolts and hard-
ware needed to attach both rails of the older AC Bariatric Beds. Two rail brackets are
also included in the hardware bag that are not used on the B700 DC Bariatric Bed. Dis-
card the rail brackets and bolts and any other hardware that you do not use.
OptionalFootRails
Foot rails are available for the B700 Bariatric Bed. They require bolting two mounting brackets
to the foot section. The rails, brackets, hardware, and quick-release lanyards are included in
the kit.
Info: When ordering Foot Rails for the B700 Bariatric Bed, order Kit # A8510.