Product Manual

18 B700-INS-LAB-RevC10
6 BEDOPERATION
BEDOPERATIONWITHTHEPENDANTHANDCONTROLLER
sNOTICE:Tousethependanthandcontrollercorrectly,pauseslightlybefore
pressingasecondbuttonforanewoperation.Avoidpressingmultiplebut-
tonsatthesametimeorpressingbuttonsrapidly.Ifthebuttonsarepressed
toorapidlyormultiplebuttonsarepressedatthesametime,thependant
functionsmaynotoperateproperly.Releasethebutton,waitatleastasec-
ond,thenproceed.
The drawing at right illustrates the func-
tion of each pendant hand controller but-
ton. To operate the bed with the pendant,
use the following guidelines:
1. To raise only the head section,
press the top left button ()
2. To lower only the head section,
press the top right button ()
3. To raise the entire bed platform,
press the middle left button ()
4. To lower the entire bed platform,
press the middle right button ()
5. To raise only the foot section,
press the bottom left button ()
6. To lower only the foot section,
press the bottom right button ()
If any of the pendant functions do not work as expected, recheck all electrical connections to
ensure all cables are seated properly within the motors and the control box, then retry the pen-
dant function that did not work.
If the function still does not work, contact your Graham-Field equipment provider immediately
to help you troubleshoot the problem and provide you with assistance on what to do next.
If the power goes out in your home or facility, unplug the bed immediately from the power out-
let. An emergency crank has been included with the bed to use in such an emergency.
flat end of crank in hi/lo motor
tube end of crank
in foot motor
To lower the bed platform with the emergency crank, insert the crank’s at end into the hi/lo
motor shaft slot as shown at above left and turn it counterclockwise.
To lower the head or foot section with the emergency crank, insert the crank’s tube end into
the end of either the head or foot motor as shown at above right and turn counterclockwise.
lower the bed
raise the bed
raise the head
lower the head
pendant
(pendant hand controller)
lower the head
raise the foot
lower the foot