Product Manual

7921KD-1-INS-LAB-RevC14

Attaching the Legs

7931R / 7931KD-1

fig. 1

7921R / 7921KD-1

fig. 2 fig. 3

1. Locate the seat frame (see g. 1); place it upside down on a at, dry surface.

2. Locate the legs (see g. 2).

3. Attach the legs to the seat frame (see g. 3). Depress the locking button at the top of

each leg and slide it into the seat frame until the button protrudes from the hole.

4. Repeat step 3 for each leg.

WARNING: Ensure legs are securely installed and all hardware is tight

before proceeding.

Attaching the Backrest: (Model 7921R and 7921KD Series Only)

fig. 4 fig. 5

1. Locate the backrest (see g. 4).

2. Attach the backrest to the seat frame (see g. 5). Depress the locking buttons and

slide the backrest onto the seat frame until the buttons protrude from the holes.

WARNING: Ensure backrest is securely installed and all hardware is

tight before proceeding.

All Models

WARNING: Ensure the Bath Seat is assembled as described. If the

Bath Seat is not properly assembled and installed, personal injury and

damage to the Bath Seat could result.