PS760 Document Camera User Manual [Important] To download the latest version of Quick Start Guide, multilingual user manual, software, or driver, etc., please visit Lumens™ http://www.lumens.com.tw/goto.
Table of contents Copyright Information ....................................................................................... 4 Chapter 1 Safety Instructions ........................................................................ 5 Precautions .................................................................................................. 6 FCC Warning................................................................................................ 6 EN55022 (CE Radiation) Warning .....................
Chapter 7 7.1 Descriptions of major functions ................................................ 26 I would like to automatically adjust the image to have best brightness and focusing performance (Auto Tune) .......................... 26 7.2 I would like to switch image sources ................................................ 26 7.3 I would like to set the image source of VGA OUT2 .......................... 26 7.4 I would like to make text clearer and photos more colorful .............. 27 7.
7.26 Computer-related functions .............................................................. 36 7.27 I would like to use the network remote control function ................... 40 Chapter 8 Connecting to Microscope ......................................................... 44 Chapter 9 DIP Switch .................................................................................... 46 9.1 Connecting to a projector or monitor ................................................ 46 9.
Copyright Information Copyrights © Lumens Digital Optics Inc. All rights reserved. Lumens is a trademark that is currently being registered by Lumens Digital Optics Inc. Copying, reproducing or transmitting this file is not allowed if a license is not provided by Lumens Digital Optics Inc. unless copying this file is for the purpose of backup after purchasing this product. In order to keep improving the product, Lumens Digital Optics Inc.
Chapter 1 Safety Instructions Always follow these safety instructions when setting up and using the Document Camera: 1. Do not place Document Camera in tilted position. 2. Do not place the Document Camera on an unstable trolley, stand or table. 3. Do not use the Document Camera near water or source of heat. 4. Use attachments only as recommended. 5. Use the type of power source indicated on the Document Camera.
Precautions Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This Document Camera has a 3-wire AC line Plug. This is a safety feature to ensure that the plug will fit into the power outlet. Do not try to disable this safety feature. If the Document Camera will not be used for an extended time, unplug it from the power socket. Note Risk of Electric Shock DO do NOT OPEN Note: To reduce the risk of electric shock, not remove cover (or back).
Chapter 2 Package Contents PS760 Quick Start Guide 4-Step Card (Note to Teacher) (For download of other language versions, please visit Lumens website) Download and Safety Instruction USB Cable Audio Cable Mini-DIN Adapter Power Cord VGA Cable Appearance may vary depending on country/region Power Adapter Remote Control Remote Control Holder Microscope Adapter English - 7
Chapter 3 Product Overview 8 6 1. 2 5 3 3 9 7 4 1. Lens 2. Camera arm 3. Auxiliary floodlight and lamp arm 4. Backlight 5. Remote Control Holder 6. DIP Switch 7. Control panel 8. Remote sensor 9. Input/output port 3.
Chapter 4 Installation and Connections 4.
4.2 Connecting to a projector or monitor VGA Cable Power Adapter Power Cord Monitor or Projector AC Outlet 4.3 Connecting to a Computer and Use Lumens Software or an Interactive Whiteboard (IWB) Projector USB Cable Power Adapter VGA Cable Power Cord USB Cable AC Outlet Computer Software can be downloaded from Lumens website.
4.4 Connecting to Internet Power Adapter Power Cord Router or HUB AC Outlet For the related setting, please refer to 7.26 I would like to use the network remote control function. 4.5 Connecting to a Projector, 2 PCs, and a Monitor at the Same Time Power Adapter VGA Cable VGA Cable Power Cord VGA Cable VGA Cable (Default) AC Outlet Computer (1) Computer (2) Projector Monitor Press button to switch the image source. For VGA 1 setting, refer to 7.2 I would like to switch image sources.
4.6 Connecting to a TV (C-Video or S-Video) DIP Switch Mini-DIN Adapter C-Video Cable S-Video Cable NTSC: USA, Taiwan, Panama, Philippines, Canada, Chile, Japan, Korea, and Mexico. PAL: Countries/regions not listed above. Please adjust it to be suitable for the local voltage frequency of 50/60Hz. For the frequency in actual use, please refer to the manual. (Attachment 1) You should unplug and reconnect the power cord, and then restart the machine for DIP Switch Settings to take effect. 4.
4.8 Connecting to DVD and display DVD images Press button to switch the image source. For VGA 1 setting, refer to 7.2 I would like to switch image sources. For VGA 2 setting, refer to 7.3 I would like to set the image source of VGA OUT2. 4.8.1 C-Video Power Adapter VGA Cable C-Video Cable Audio Cable Power Cord Monitor or Projector AC Outlet DVD 4.8.
4.9 Connecting to a Computer with RS232 Mini-DIN Adapter Power Adapter Power Cord AC Outlet RS232 Cable Computer 4.10 Connecting to Audio Input and Output The default of Audio Output is based on VGA OUT(1). Or connect to an additional amplifier before connecting to the speaker.
4.11 Installing application software The application software installed on the computer enables you to: Control the PS760. Capture and record images. Annotate the image, highlight important details and save it. Support the full screen function. Please refer to Podium View™ software user manual for installation steps and software operation.
Chapter 5 Start Using : Please adjust it to be suitable for the local voltage frequency of 50/60Hz. For the frequency in actual use, please refer to the manual. (Attachment 1) 1. Remove the lens cap. 2. Pull up the camera and the camera arm. The camera should aim at the center of the presenter. 3. Pull up the lamp arm to a proper position. 4. Place an object to be displayed under the camera. 5. Press [POWER] button to turn on the power.
Chapter 6 Control Panel/Remote Control and Setting Menu 6.1 Functions of control panel and remote control The below functions are listed alphabetically. Name Function Descriptions Operation Turn on and off the Document Camera. Remote control/ Control panel ,,, Move up, down, left or right to select the needed function. Remote control/ Control panel AUTO TUNE Automatically adjust the image to have the best brightness and focusing performance.
PAN Enable/Disable the Partial Enlarged mode. Remote Control PIP Image comparison (compares live images with captured image files). Remote Control PLAYBACK Read files stored in the USB disk (priority) or internal memory. Remote Control RECORD Record motion images. Press [RECORD] to record images to USB disk (priority) or internal memory, and then press [RECORD] again to stop recording.
6.2 Setting Menu 6.2.1 Main Menu: Press [Menu] on the remote control or control panel to enter the setting menu; The bold underlined values in the following table are defaults. st 1 Level Major Items rd 3 Level Adjustment values nd 2 Level Minor Items Function Descriptions Auto Tune Enter Automatically adjust the image to have the best brightness and focusing performance. Auto Focus Enter Automatically adjust the focal length of image.
st 1 Level Major Items Storage rd 3 Level Adjustment values nd 2 Level Minor Items Function Descriptions Slide Show Enter Press [ENTER] to show the photos or videos stored in the USB disk (priority) or internal memory in Slide mode. Playback Enter Press [ENTER] to enter the thumbnail mode of image. Delay 1. 2. 3. 4. 5. 6. 0.5 Sec 1 Sec 3 Sec 5 Sec 10 Sec Manual Use the left and right arrow keys to select the delay time. Select manual mode to switch images manually. Image Quality 1. 2. 3.
st 1 Level Major Items rd 3 Level Adjustment values nd 2 Level Minor Items Capture Action 1. 2. 3. Capture Mode Capture Time Capture Interval Setting Single Continuous shooting Disable Photo/Video 1. 1 hr 2. 2 hr 3. 4 hr 4. 8 hr 5. 24 hr 6. 48 hr 7. 72 hr 1. 5 Sec 2. 10 Sec 3. 30 Sec 4. 1 Min. 5. 2 Min. 6. 5 Min. Function Descriptions Use the left and right arrow keys to select the capture mode.
st 1 Level Major Items Ethernet Language Advanced rd 3 Level Adjustment values nd 2 Level Minor Items VGA OUT(2) Function Descriptions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. English 繁體中文 Deutsch Français Español Русский Nederlands Suomi Polski Italiano Português Svenska ČESKY 简体中文 Press [ENTER] to show the Ethernet window. For details, please refer to 6.2.5 Ethernet Setting Menu.
6.2.2 MASK Mode Setting Menu st 1 Level Major Items Mask Mode nd 2 Level Minor Items rd 3 Level Adjustment values Transparency 0~4~6 Step Large/Medium/ Small V Size 0~A~Max H Size 0~A~Max Spotlight Activate Function Descriptions Adjust the transparency of the mask using left and right arrow keys. Select the step distance of the mask using left and right arrow keys. Adjust the vertical height of the mask using left and right arrow keys.
6.2.4 Date & Time Setting Menu st 1 Level Major Items rd 3 Level Adjustment values nd 2 Level Minor Items Year 00~36 Month 01~12 Date & Time Date 01~31 Hour 00~23 Minute 00~59 Function Descriptions Press [ENTER] to modify the values using left and right arrow keys. Press [ENTER] to modify the values using left and right arrow keys. Press [ENTER] to modify the values using left and right arrow keys. Press [ENTER] to modify the values using left and right arrow keys.
6.2.6 Annotation Tools (Annotation) After the mouse is connected, right click the mouse to start the tools. When the setting menu is activated, the tools cannot be used.
Chapter 7 Descriptions of major functions 7.1 I would like to automatically adjust the image to have best brightness and focusing performance (Auto Tune) 1. Press [AUTO TUNE] on the remote control or control panel to adjust automatically. 7.2 I would like to switch image sources The default of image source is Live Image. Press [VGA 1] on the remote control or control panel to switch setting, and PS760 as well as audio output will switch among the following four modes in turn: 1. Live images (default) 2.
7.4 I would like to make text clearer and photos more colorful 7.4.1 Photo/Text mode descriptions The default [Photo/Text] mode is in Photo (Photo mode). To change this setting, please use the remote control or the control panel to enter the Options of the Setting Menu. [Photo] (default): for viewing photos or text with photos, making photos more colorful. [Text]: for viewing text files, making the text clearer.
7.6.2 Manual Tracking 1. Press [MENU] on the remote control or control panel to enter the setting menu. 2. Press [] or [] to the [Display] menu. 3. Press [] to the [Focus]. 4. Press [] or [] to adjust focal length. 5. Press [MENU] to exit. 7.7 I would like to adjust the brightness 1. Use Remote Control or Control Panel and press [BRT+] to make it brighter. 2. Use Remote Control or Control Panel and press [BRT-] to make it darker. 7.
7.10.2 Adjust the volume of the video In PLAYBACK mode, Press [] or [] to adjust the volume of the video. 7.11 I would like to capture images 7.11.1 Capturing and saving images 1. Press [CAPTURE] on the remote control or control panel to capture and save images. You cannot capture images when the capture mode is set to [Disable]. If it is set to [Continuous], you can capture images continuously. Press [CAPTURE] to start capturing continuously, or press [CAPTURE] again to exit.
7.12 I would like to record videos 7.12.1 Recording motion images You may not be able to capture or record images when [Capture Action] mode is set to [Disable]. Remote control: 1. Press [RECORD] to record videos. 2. Record sounds with the built-in microphone of the control panel. 3. Press [RECORD] again to stop recording. Control panel: 1. Press [MENU] to enter the setting menu. 2. Press [] or [] to the [Setting] menu. 3. Press [] to the [Capture Mode]. 4. Press [] or [] to select [Video]. 5.
6. Press [MENU] to exit. A better playback performance will be achieved when an external speaker is connected to AUDIO OUT. 7.14 I would like to delete the captured/recorded images 1. 2. 3. 4. 5. 6. Use the remote control and press [PLAYBACK]. Press [] or [] or [] or [] to select the file you want to delete. Pressing [DELETE] will open a [Delete File] window. Press [] or [] to select [Yes] (The default value is No). Press [ENTER] to delete the selected file. Press [MENU] to exit. 7.
7.16.2 I would like to set the size of Mask/Spotlight function In Mask/Spotlight mode, use the remote control: 1. Press [MENU] to enter the image OSD menu. 2. Press [] or [] to select the item to be modified [Transparency/Step/V Size/H Size]. (For details, please refer to 6.2 Setting Menu.) 3. Press [] or [] to perform the modification. 4. Press [MENU] to exit the image OSD menu and return to the Mask mode. 7.17 I would like to enlarge a part of the image (PAN) Use Remote control: 1.
Control panel: 1. Press [MENU] to enter the setting menu. 2. Press [] or [] to the [Storage] menu. 3. Press [] to find [Slide Show]. 4. Press [ENTER] to play. 5. Press [ENTER] to pause playing. 6. Press [ENTER] again to continue playing. 7. To stop playing, repeat Steps 1 and 4. 7.19 I would like to view the X-ray film 1. Place an X-ray film to be displayed under the camera. 2. Press [Lamp] button on the control panel to switch on the Backlight (in the sequence of arm lamp/backlight/OFF) 3.
7.21 I would like to reduce the image noise (Projector Type) 1. This function enables Document Camera to automatically clear image noise. The noise is especially obvious when Document Camera is connected to a DLP projector. You can set the DLP projector to improve the image quality. 2. If there is special noise when VGA out is connected, please set DLP option to improve the image quality. 2.1. Press [MENU] on the remote control or control panel to enter the setting menu. 2.2.
7.22.2 To use web remote control For more information about the website login page, please refer to 7.26.1 I would like to view the live image or use the control keys. 1 3 2 4 5 1. Click [System setting]. 2. Click [Date config]. 3. Set the date and time. Set Manually: Set the date and time manually. Synchronize with Computer Time: Synchronize time with the PC. Synchronize with SNTP Server: Synchronize time with SNTP server. 4. Select the date format. 5.
This function applies to the keys of the control panel only. The remote control can still be used. If you use the remote control to turn off the power, the keys will be unlocked automatically after reboot. 7.24 I would like to resume the factory default settings (Factory Reset) 7.24.1 Using OSD menu 1. Press [MENU] on the remote control or control panel to enter the setting menu. 2. Press [] or [] to select [Advanced] menu. 3. Press [] to select [Factory Reset]. 4.
7.26.1 I would like to insert a photo in MS-Paint Support Windows XP Operation System only. 1. Click [File/From Scanner or Camera] in MS-Paint as shown in the bottom left figure. 2. Click [Get Picture] will capture the photos of live images and insert the files in use shown as top right figure. 7.26.2 I would like to insert a photo in MS-Word Support Windows XP Operation System only. 1. Click [Insert/Image/From Scanner or Camera] in MS-Word. 2.
3. Click [Get Picture]. It will capture the photo of live image. 7.26.3 I would like to change the setting of the PS760 and then capture a photo in MS-Word For Windows Office 2003 or later versions, please use the function with OneNote. 1. Click [Insert/Image/From Scanner or Camera] in MS-Word. 2. Select [Lumens Document Camera Twain] and click [Custom Insert].
3. A window showing a live image (see below) will be displayed. 4. Press [Capture] to capture images in MS-Word. 5. Press [Cancel] to exit. 7.26.4 I would like to set the PS760 as a PC Camera For Windows XP, please set by system name (USB video device) Open [My Computer] and click [Lumens Document] to open a live image. Lumens Document 7.26.
7.27 I would like to use the network remote control function Network has a longer distance for controlling than USB and RS232 interface do. Each function of PS760 could be controlled and used by the browser (IE) on the computer for users. 7.27.1 I would like to view the live images or use the control keys 7.27.1.1 Login to the PS760 network control page 1. Open the web browser (Internet Explorer) and enter the IP address in the address bar To check IP address, please refer to 7.26.1.
2. 3. 4. 5. Press [] or [] to the [Advanced] menu. Press [] or [] to the [Ethernet]. Press [ENTER] to open the Ethernet OSD menu. Press [MENU] to exit OSD menu. Ethernet DHCP ON IP address Netmask Getway 7.27.1.3 View the live image A. Use IE browser 2 1 3 1. View the live image. 2. The control method of control keys is the same as that of the remote control. The button will be gray and disabled for users whose permission is view-only. 3. Change the size of live image.
For more information about user permissions, please refer to 7.26.2 I would like to add or modify the user account. B. Using VLC It is recommended that you download the VLC software and view with it when the number of users is more than four. Besides, all users must be in the same domain. VLC is only provided for viewing, no control keys are available. 7.27.
7.27.2.1 1. 2. 3. 4. 5. 6. 7. I would like to add the user account Click [User config]. Click [Account management]. Enter the username in the [User Name]. Enter the password in the [Password]. Enter the password in the [Confirm] again. Set the permissions in the [Authority]. Click [Submit] to conform and submit. 7.27.2.2 I would like to delete the user account 1. Click the username in the [User List]. 2. Click [Delete User] to delete the user. 7.27.2.3 1. 2. 3. 4. 5. 6.
Chapter 8 Connecting to Microscope 1 Mount the microscope adapter (Optional) onto the microscope. Please choose an appropriate microscope adapter. Microscope adapter accessories are applicable to eyepieces of Ø 28 mm, Ø 31 mm, Ø 33 mm, and Ø 34 mm. 2 The lens of PS760 connects with the microscope adapter If the eyepiece is Ø 33 mm or Ø 34 mm, only one Lumens microscope adapter is needed. If the eyepiece is Ø 28 mm or Ø 31 mm, you need two microscope adapters. (1. The Lumens microscope adapter. 2.
3 Select the [Microscope] mode 3.1. If you use the remote control or the control panel 3.1.1. Press [MENU] to enter the setting menu. 3.1.2. Press [] or [] to the [Display]. 3.1.3. Press [] to select [Mode]. 3.1.4. Press [] or [] to the [Microscope]. 4 If the image is not clear 4.1. Please adjust the focus of microscope. 4.2. Please press the remote control or the control panel [AUTO TUNE] button to activate the auto focus. 5 Digital Zoom 5.1. If you use the remote control or the control panel 5.1.1.
Chapter 9 DIP Switch You should unplug and reconnect the power cord, and then restart the PS760 for all DIP Switch Settings to take effect. 9.1 Connecting to a projector or monitor 9.1.1 XGA 60Hz output XGA 50Hz output (default values) 9.1.2 SXGA 60Hz output SXGA 50Hz output 9.1.3 WXGA 60Hz output WXGA 50Hz output 9.1.
9.1.5 1080P 60 Hz output 1080P 50 Hz output 9.2 Connecting to a TV/DVD 9.2.1 NTSC: USA, Taiwan, Panama, Philippines, Canada, Chile, Japan, Korea, and Mexico. 60Hz 50Hz 9.2.2 PAL: Countries/regions not listed above.
Chapter 10 Packing the Machine 1. Put the remote control back to the holder. 2. Fold back the camera head to align with the arm. 3. Turn the two lamp arms and the arm of camera head down and adjust them to be parallel with the platform. 4. Put the lens cap on the camera head. 5. Finally, fold the machine as in the following figure.
Chapter 11 Troubleshooting This chapter describes problems you may encounter while using PS760. If you have questions, please refer to related chapters and follow all the suggested solutions. If the problem still occurred, please contact our distributors or service center. No. Problems Solutions 1 Boot without power signal 2 No image output from 1. Check the power the PS760 2. Check all cable connections. Refer to Chapter 4 Installation and Connections in this manual.
long. For the related setting, refer to 7.11 I would like to capture images of Chapter 7 Descriptions of major functions. 9 The images Press [AUTO TUNE] to automatically adjust to the optimal outputted from brightness and focal length. PS760 are too bright, dark or vague 10 Unable to record images 11 The operating steps in the manual are not applicable to the machine 1. Check to see if the stored data have reached the maximum size of the USB disk (priority) or internal memory. 2.
13 The images Please refer to the manual (Attachment 1), confirm the outputted are not voltage frequency and reset it according to Chapter 9 DIP clear, and the moire Switch Settings appears.
Attachment 1 World voltage & frequency 阿 富 汗 阿爾及利亞 安 哥 拉 安 地 瓜 阿 根 廷 澳 洲 Afghanistan Algeria Angola Antiqua Argentina Australia 50 50 50 50 50 50 Chinese English 大 陸 哥 倫 比 亞 剛 果 哥斯大黎加 古 巴 塞 普 路 斯 China Colombia Congo Costa Rica Cuba Cyprus Czechoslov akia Dahomey Den mark Dominican Dubai Ecuador Egypt 澳 地 利 Austria 50 捷 亞 巴 巴 孟 巴 比 百 述 哈 爾 馬 林 拉 多 時 達 50 60 60 50 50 50 60 加 貝 利 慕 Azores Bahamas Bahrain Bangladesh Babados Belgium Bermuda 玻 利 維 亞 Bolivia 50 波 保 加 利 亞 Bulgaria 緬 甸 Burma
Chinese English 利 Chile 亞 Libya 堡 Luxembourg 50 格 陸 蘭 Greenland 曼 Oman 50 阿 50 巴 基 斯 坦 Pakistan 門 Macao 50 巴 拿 馬 Panama 馬得拉群島 Madeiral Majokca 馬約 卡 島 Island 50 巴 拉 馬 拉 加 西 Malagasy 50 菲 馬 拉 威 馬來 西 亞 馬 利 馬 爾 他 馬丁尼克島 茅里塔尼亞 模里 西 斯 50 50 50 50 50 50 50 比 森 澳 Malawi Malaysia Mali Rep.
