PC190 Document Camera User Manual [Important] To download the latest version of Quick Start Guide, multilingual user manual, software, or driver, etc., please visit Lumens http://www.lumens.com.tw/goto.
Table of contents Copyright Information ....................................................................................... 3 Chapter 1 Safety Instructions .......................................................................... 4 Precautions .................................................................................................. 5 FCC Warning................................................................................................ 5 EN55022 (CE Radiation) Warning .....................
7.2 I would like to switch image sources ................................................ 23 7.3 I would like to make text clearer and photos more colorful .............. 23 7.4 I would like to zoom in/out images ................................................... 24 7.5 I would like to use the auto focus ..................................................... 24 7.6 I would like to adjust the focal length................................................ 24 7.
Copyright Information Copyrights © Lumens Digital Optics Inc. All rights reserved. Lumens is a trademark that is currently being registered by Lumens Digital Optics Inc. Copying, reproducing or transmitting this file is not allowed if a license is not provided by Lumens Digital Optics Inc. unless copying this file is for the purpose of backup after purchasing this product. In order to keep improving the product, Lumens Digital Optics Inc.
Chapter 1 Safety Instructions Always follow these safety instructions when setting up and using the Document Camera: 1. Do not place Document Camera in tilted position. 2. Do not place the Document Camera on an unstable trolley, stand or table. 3. Do not use the Document Camera near water or source of heat. 4. Use attachments only as recommended. 5. Use the type of power source indicated on the Document Camera.
Precautions Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This Document Camera has a 3-wire AC line Plug. This is a safety feature to ensure that the plug will fit into the power outlet. Do not try to disable this safety feature. If the Document Camera will not be used for an extended time, unplug it from the power socket. Note Risk of Electric Shock DO NOT OPEN Caution: To reduce the risk of electric shock, do not remove cover (or back).
Chapter 2 Package Contents PC190 Quick Start Guide 4-Step Card (For download of other language versions, please visit Lumens website) Download and Safety Instruction VGA Cable USB Cable Power Cord Remote Control Audio Cable Appearance may vary depending on country/region Remote Control Holder Microscope Adapter Accessory Pouch Pouch English - 6
Chapter 3 Product Overview 1. Gooseneck 2. AF button 3. Lamp 4. Control panel 5. LED indicator 6. Built-in Microphone 7. Remote sensor 8. Lens 9. LED lamp 10.
3.1 Relative position of the presenter and document 3.
Chapter 4 Installation and Connections 4.
4.2 Installation and setup 1. Please set up the DIP Switch Settings first. Refer to Chapter 9 DIP Switch Settings in the PC190 User Manual. 4.3 Connecting to a projector or monitor VGA Cable Power Cord Monitor or Projector AC Outlet 4.4 Connecting to a computer and use Podium View™ software USB Cable Power Cord Projector VGA Cable AC Outlet Computer Software can be downloaded from Lumens website.
4.5 Connecting to a computer and projector or monitor simultaneously VGA Cable VGA Cable Power Cord Monitor or Projector AC Outlet Computer Press [SOURCE] button to switch the image source. 4.
4.7 Connecting to an Interactive Whiteboard (IWB) Projector USB Cable Power Cord VGA Cable USB Cable AC Outlet Computer It can be interoperated with major IWB models. The user manual can be downloaded from Lumens website. 4.8 Connecting to a TV DIP Switch C-Video Cable Power Cord AC Outlet NTSC: USA, Canada, Mexico, Panama, Chile, Japan, Taiwan, Korea, and Philippines PAL: Countries/regions not listed above.
4.9 Connecting to a speaker Power Cord Earphone or speaker AC Outlet 4.10 Connecting to a Computer with RS232 RS232 Adapter Power Cord AC Outlet Computer After connecting to the RS232 cable, you can use RS232 commands to control PC190.
4.11 Installing application software The application software installed on the computer enables you to: Control the PC190. Capture and record images. Annotate the image, highlight important details and save it. Support the full screen function. Please refer to Podium View™ software user manual for installation steps and software operation.
Chapter 5 Start Using 1. Place an object to be displayed under the camera. 2. Turn on Power . 3. Adjust the gooseneck and lens to the appropriate positions. 4. Press [AUTO TUNE] button to optimize the image. You are ready to teach/present. Each time the lens is moved, locate the camera head and press [FOCUS] to refocus the lens When using the remote control, aim at the remote sensor on the PC190, and press the power button.
Chapter 6 Control Panel/Remote Control and Setting Menu 6.1 Functions of control panel and remote control The below functions are listed alphabetically Name Function Descriptions Turn on and off the Document Camera. ,,, Move up, down, left or right to select the needed function. FOCUS AF Button. Operation Remote control/Control panel Remote control/Control panel Either sides of the lens AUTO TUNE Automatically adjust the image to have the best brightness and focusing performance.
PIP Image comparison (compares live images with captured image files). Remote Control Read files stored in the USB disk (priority) Remote control/Control or internal memory. / panel Record motion images. Press [Record] to RECORD record images to USB disk (priority) or Remote Control internal memory, and then press [Record] again to stop recording. SLIDE SHOW Show the photos or videos stored in the Remote Control USB disk (priority) or internal memory in Slide mode.
6.2 Setting Menu 6.2.1 Version query: 1. Press [Menu] on the remote control or control panel to enter the setting menu. 2. Press [] or [] to enter the [Advanced] menu. Master:DHM025 Slave:DHO010 6.2.2 Setting menu Press [Menu] on the remote control or control panel to enter the setting menu; The bold underlined values in the following table are defaults. 1st Level Major Items Display 2nd Level Minor Items 3rd Level Adjustment Values Auto Tune Activate Lamp 1. 2. 3. 4.
Slide Show Activate Show the photos or videos stored in the USB disk (priority) or internal memory in Slide mode. Delay 1. 2. 3. 4. 5. 6. Use the left and right arrow keys to select the delay time. Select manual mode to switch images manually. Image Quality 1. High 2. Medium 3. Low Copy To USB Disk Yes/No Delete All Yes/No Format Yes/No Storage Capture Capture Time Setting Capture Interval 1. 2. 3. 1. 2. 3. 4. 5. 6. 7. 1. 2. 3. 4. 5. 6. 0.
Projector Type Language DLP/LCD 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. English 繁體中文 Deutsch Français Español Русский Nederlands Suomi Polski Italiano Português Svenska ČESKY 简体中文 Advanced Lock Down On/Off Auto Erase On/Off Preset Load Yes/No Preset Save Yes/No Factory Reset Yes/No Use the left and right arrow keys to select the projector type and reduce image noise.
6.2.3 MASK Mode Setting Menu 2nd Level Major Items MASK Mode 3rd Level Minor Items 4th Level Adjustment Values Transparency 0~4~6 Step Large/Medium/Small V Size 0~A~Max H Size 0~A~Max Spotlight Activate Function Descriptions Adjust the transparency of the mask using left and right arrow keys. Select the step distance of the mask using left and right arrow keys. Adjust the vertical height of the mask using left and right arrow keys.
6.2.5 Annotation Tools (Annotation) After the mouse is connected, right click the mouse to open the tools. < Note> When the setting menu is activated, the tools cannot be used.
Chapter 7 Descriptions of major functions 7.1 I would like to automatically adjust the image to have the best brightness and focusing performance Remote control: 1. Press [AUTO TUNE] for the optimal brightness and focal length. Control panel: 1. Press [MENU] to enter the setting menu. 2. Press [] or [] to select [Display]. 3. Press [] to select [Auto Adjust]. 4. Press [ENTER]. 7.2 I would like to switch image sources The default of image source is Live Image.
3. Press [] to select [Photo/Text]. (Please refer to 7.3.1 Photo/Text mode descriptions to make the best choice.) 4. Press [] or [] to select the [Photo/Text/Gray]. 5. Press [MENU] to exit. 7.4 I would like to zoom in/out images 1. Press [ZOOM+] on the remote control or control panel to zoom in images. 2. Press [ZOOM-] on the remote control or control panel to zoom out images. 7.5 I would like to use the auto focus 1. Press the [FOCUS] AF button on the right side of the lens. 7.
7.8 I would like to turn on/off the lamp The default of the lamp is OFF. When using the remote control or control panel: 1. Press [MENU] to enter the setting menu. 2. Press [] or [] to select [Display]. 3. Press [] to the [Lamp]. 4. Press [] or [] to select [Off/Arm lamp/Both Lamps/Head lamp]. 5. Press [MENU] to exit. 7.9 I would like to freeze images 1. Press [FREEZE] on the remote control to freeze the current image on the screen. Press again to defreeze. 7.10 I would like to capture images 7.10.
7.10.3 Setting continuous capture 1. Press [MENU] on the remote control or control panel to enter the setting menu. 2. Press [] or [] to the [Setting] menu. 3. Press [] to find [Capture]. 4. Press [] or [] to select [continuous]. 5. Press [] to find [Capture Time]; Press [] or [] to set capture time. 6. Press [] to find [Capture Interval]; Press [] or [] to set interval time. 7. Press [MENU] to exit. 7.11 I would like to record videos 7.11.
7.12 I would like to view captured/recorded images 1. Press [PLAYBACK] on the remote control or control panel to display thumbnails of all stored files. 2. Press [] or [] or [] or [] to select the thumbnail you want to play. 3. Press [ENTER] for full-screen play. 4. Press [] or [] to select different video and audio files. 5. Press [] or [] to adjust the volume of the video. 6. Press [MENU] to exit. An external speaker must be connected to AUDIO OUT to play sound. 7.
7.15 I would like to enlarge a part of the image (PAN) Use Remote control: 1. Press [PAN] to enter the Partial Enlarged mode. 2. Press [] or [] or [] or [] to move and view the partial enlarged images. 3. Press [PAN] to exit the partial enlarged mode. 7.16 I would like to use the MASK and Spotlight function 7.16.1 I would like to use the MASK or Spotlight mode Use Remote control: 1. Press [MASK] to enter the Mask mode, and press [] or [] or [] or [] to move the mask position. 2.
7.17 I would like to play the slides (Slide Show) 7.17.1 Setting delay time 1. Press [MENU] on the remote control or control panel to enter the setting menu. 2. Press [] or [] to the [Storage] menu. 3. Press [] to find [Delay]. 4. Press [] or [] to select image switch mode between [0.5 Sec/1 Sec/3 Sec/5 Sec/10 Sec/Manual]. 5. Press [MENU] to exit. 7.17.2 Activating/Pausing/Stopping the slide show Upper Limit: The maximum size of single photo is 7 MB. Remote control: 1.
7.18 I would like to compare images (compare live images with stored images (PIP)) This function will compare and contrast a live image with a stored image. C1 C2 C3 C4 C5 C6 C7 Live image Stored image Remote control: 1. Press [PIP] to enter the photo selection screen. 2. Press [] or [] or [] or [] to select the file to be compared. 3. Press [ENTER] to activate image comparison. 4. Press [] or [] or [] or [] to move the live image. 5.
2.1 Press [MENU] on the remote control or control panel to enter the setting menu. 2.2 Press [] or [] to the [Setting] menu. 2.3 Press [] to enter [Projector Type]. 2.4 Press [] or [] to select [LCD/DLP]. 2.5 Press [MENU] to exit. 7.20 I would like to resume the factory default settings (Factory Reset) 7.20.1 Using OSD menu 1. Press [MENU] on the remote control or control panel to enter the setting menu. 2. Press [] or [] to select [Advance] menu. 3. Press [] to select [Factory Reset]. 4.
7.22.1 I would like to insert a photo in MS-Paint 1. Click [File/From Scanner or Camera] in MS-Paint as shown in the bottom left figure. 2. Click [Get Picture] will capture the photos of live images and insert the files in use shown as top right figure. Support Windows XP Operation System only. 7.22.2 I would like to insert a photo in MS-Word For Windows Office 2003 or later versions, please use the function with OneNote. 1. Click [Insert/Image/From Scanner or Camera] in MS-Word. 2.
Lumens Document 3. Click [Get Picture]. It will capture the photo of live image. 7.22.3 I would like to change the setting of the PC190 and then capture a photo in MS-Word For Windows Office 2003 or later versions, please use the function with OneNote. 1. Click [Insert/Image/From Scanner or Camera] in MS-Word. 2. Select [Lumens Document] and click [Custom Insert].
Lumens Document 3. A window showing a live image (see below) will be displayed. 4. Press [Setting]: To control the PC190 via the Camera Settings interface. The operating procedure is the same with the remote control and control panel of the PC190. Refer to Chapter 6 Control Panel/Remote Control and Setting Menu. 5. Press [Capture] to capture images in MS-Word. 6. Press [Cancel] to exit. 7.22.
Lumens Document 3. Start calling your contact. When both sides are connected, Skype will display the video screen.
7.22.5 I would like to set the PC190 as a PC Camera For Windows XP, please set by system name (USB video device) Open [My Computer] and click [Lumens Document] to open a live image. Lumens Document 7.22.6 I would like to connect an Interactive Whiteboard To connect an Interactive Whiteboard, go to Lumens website to download the reference guide for a specific brand (http://www.lumens.com.tw/goto.htm).
Chapter 8 Connecting to Microscope 1 Mount the microscope adapter onto the microscope Please choose an appropriate microscope adapter. Microscope adapter accessories are applicable to eyepieces of Ø 28 mm, Ø 31 mm, Ø 33 mm, and Ø 34 mm. 2 The lens of PC190 connects with the microscope adapter If the eyepiece is Ø 33 mm or Ø 34 mm, only one Lumens microscope adapter is needed. If the eyepiece is Ø 28 mm or Ø 31 mm, you need two microscope adapters. (1. The Lumens microscope adapter. 2.
Chapter 9 DIP Switch You should unplug and reconnect the power cord, and then restart the PC190 for all DIP Switch Settings to take effect. 9.1 Connecting to a projector or monitor 9.1.1 XGA output (default values): 9.1.2 SXGA output 9.1.
9.2 Connecting to a TV 9.2.1 NTSC: USA, Taiwan, Panama, Philippines, Canada, Chile, Japan, Korea, and Mexico 9.2.2 PAL: Countries/regions not listed above Once C-VIDEO is on, VGA OUT is not supported.
Chapter 10 Troubleshooting This chapter describes problems you may encounter while using PC190. If you have questions, please refer to related chapters and follow all the suggested solutions. If the problem still occurred, please contact our distributors or service center.. No.
react. 8 9 The images outputted from PC190 are too bright, dark or vague. Unable to record images 10 The operating steps in the manual are not applicable to the machine. 11 How to release the locked machine internal memory. 2. Please make sure if the Capture function is set to Continuous mode or the time for capture is set to be long. For the related setting, refer to 7.10 I would like to capture images of Chapter 7 Descriptions of major functions.
