Full Product Manual

16
© Limitless Innovations, Inc.
Operation Instructions cont’d
HOW TO SET THE DURATION
1. To adjust the timer, turn the Timer Knob until the
dial aligns with one of the time durations.
10S: Once motion is sensed and the LED Light
is activated, the LED Light will remain on for
approximately 10-seconds unless motion is
detected again.
20S: Once motion is sensed and the LED Light
is activated, the LED Light will remain on for
approximately 20-seconds unless motion is
detected again.
30S: Once motion is sensed and the LED Light
is activated, the LED Light will remain on for
approximately 30-seconds unless motion is
detected again.
NOTE: The angle between durations is not
proportional to time.