Full Product Manual

Operation Instructions cont’d

4. Insert the ﬂat end of the L-Rod into the L-Rod

Slots on the Mounting Bracket.

5. Rotate the L-Rod 90° to keep the Lumenology Dual

Security Motion Light from sliding o.

6.Place the Lumenology Dual Security Motion Light

with the hanging surface in-between the Clamp and

Mounting Bracket (shown left).

7. Once the Lumenology Dual Security Motion Light

is in the desired position, continue to thread the

Butterﬂy Nut clockwise until tight and secure.

8. Adjust the LED Lights, Adjustable Arm and Motion

Sensor as shown in the following steps until

satisﬁed with the positioning.