User Manual
Table Of Contents Safety Information.............................................................................................................................................1-2 Introduction / What’s Included.......................................................................................................................3 Components............................................................................................................................................................
Safety Information By using the Lumenology Dual Security Motion Light, you hereby agree that Limitless Innovations, Inc., an Illinois corporation and its affiliates (“Limitless”) shall have no liability for any losses associated with property damage, personal injury or loss of life that are incurred by you or by any third party in connection with or relating in any manner whatsoever to your use of the Lumenology Dual Security Motion Light.
Safety Information cont’d • Do NOT mix new and old batteries. It may cause the LED Light to malfunction. • Do NOT look directly at the LED Light. • Do NOT mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal Hybrid) batteries. • Do NOT install the main body in places where large amount of water may come in contact with the Lumenology Dual Security Motion Light. • Do NOT use near home electric appliances.
Introduction LUMENOLOGY DUAL SECURITY MOTION LIGHT The Lumenology Dual Security Motion Light is an ultra-bright, 1000 Lumen LED Light that will instantly improve a home’s security. Includes MotionSense Technology that boast a 20ft detectable range and 140° field-of-view, while LightSense Technology allows for adjustment of detecting motion in both light and dark environments. The dual adjustable LED Lights and Motion Sensor make it a perfect fit anywhere around a house or office building.
Components 1. Mounting Holes 2. LED Light 3. Red LED Indicator Light 4. Motion Sensor 5. Adjustable Arm 6. L-Rod Slots 7. Mounting Bracket 8. Bracket-to-Arm Screw 9. Battery Cover 10. Battery Cover Thumb Screw 11. Timer Knob 12. Light Sensitivity Knob 13. Inner Battery Cover 14. Battery Box 15. Clamp 16. L-Rod 1 2 3 4 Body 5 6 7 8 9 10 13 14 Side Inside 15 11 16 12 Attachment Bottom 4 © Limitless Innovations, Inc.
Technical Specifications Title Specification Units Bulb High-Luminance White LED N/A Battery 3x D Dry Cell N/A Brightness 1,000LM Lumens Activations Approx. 1,530 (Based on the 30-second auto shut-off mode) N/A Modes 10s / 20s / 30s Auto Shut-Off Seconds Light Sensor Mode Adjustable - Day / Night N/A Detecting Method Motion N/A Detectable Range 140°, 20ft Max Degrees, Feet Adjustable Range 360° Degrees Size / Weight 11in x 6.9in x 6in | 18.
Operation Instructions HOW TO SET UP THE LUMENOLOGY DUAL SECURITY MOTION LIGHT 1. Turn the Battery Cover Thumb Screw counterclockwise until the Battery Cover is detached from the Battery Box of the Lumenology Dual Security Motion Light and pull away. 2. Disengage the Inner Battery Cover by pressing down where the Inner Battery Cover is labeled “PUSH” and pull away. NOTE: The Inner Battery Cover does NOT disconnect completely. It rotates on a 90° axis.
Operation Instructions cont’d 4. Insert 3x D Batteries and be sure to align the positive (+) and negative (-) terminals correctly. (Batteries sold separately). CAUTION: Some equipment using three or more batteries may appear to work properly even if one battery is inserted incorrectly; such usage may lead to battery leakage or rupture that could result in equipment damage. 5. Rotate the Inner Battery Cover back into place. Push in until it clicks and does not rotate freely. 7 © Limitless Innovations, Inc.
Operation Instructions cont’d 6. Close the Battery Box by first aligning the three tabs on the Battery Cover to the three notches in the Battery Box (Shown left). 7. Turn the Battery Cover downward until completely closed. 8. Rotate the Battery Cover Thumb Screw clockwise until the Battery Cover is tightened and secured to the Battery Box. 8 © Limitless Innovations, Inc.
Operation Instructions cont’d SENSOR DETECTION RANGE 1. The Motion Sensor can detect movement in a max field-of-view of 140° and a max distance of 20ft. NOTES: • The Motion Sensor is less likely to detect motion when walking directly towards the unit. • The detection area performs best when set to a height of 6.5ft (2M) high. 9 © Limitless Innovations, Inc.
Operation Instructions cont’d HOW TO INSTALL THE LUMENOLOGY DUAL SECURITY MOTION LIGHT USING BRACKET 1. Measure, locate, and mark where the Lumenology Dual Security Motion Light will be installed. NOTE: It is recommended to install the Lumenology Dual Security Motion Light directly to a wooden stud, metal stud or plywood wall sheathing. 2. Place the Mounting Bracket on the spot marked in step 1. 3. Using a pencil, mark the location through two of the Mounting Holes as shown.
Operation Instructions cont’d Concrete: 4c. Remove the Mounting Bracket to expose the marks made in step 3 on page 10. 5c. Pre-drill a 1/4” hole at each of the marked locations. 6c. Insert the Anchors into the drilled holes from step 5c. You may need to lightly hammer the Anchors in place. 7c. Place the Mounting Bracket over the Anchors aligning the Mounting Holes to the Anchors. 8c. Fasten the Lumenology Dual Security Motion Light to wall with the supplied Screws. USING CLAMP 1.
Operation Instructions cont’d 4. Insert the flat end of the L-Rod into the L-Rod Slots on the Mounting Bracket. 5. Rotate the L-Rod 90° to keep the Lumenology Dual Security Motion Light from sliding off. 6.Place the Lumenology Dual Security Motion Light with the hanging surface in-between the Clamp and Mounting Bracket (shown left). 7. Once the Lumenology Dual Security Motion Light is in the desired position, continue to thread the Butterfly Nut clockwise until tight and secure. 8.
Operation Instructions cont’d HOW TO ADJUST THE MOTION SENSOR 1. Grab the Motion Sensor along two sides and rotate left, right, up or down until the preferred positioning is achieved. NOTES: • Do NOT force any movement as it may cause damage to the Motion Sensor. • The Motion Sensor will only rotate left / right 160° and up / down 30°. Maximum Field-of-View: Adjust the Motion Sensor horizontally. Minimum Field-of-View: Adjust the Motion Sensor diagonally downward. HOW TO ADJUST THE BODY POSITION 1.
Operation Instructions cont’d 2. For additional movement to the Adjustable Arm, loosen with the Bracket-to-Arm Screw by turning counterclockwise. This will allow the Adjustable Arm to rotate an additional 160° side-to-side. Once the desired positioning is achieved, retighten the Bracket-to-Arm Screw by turning clockwise. NOTE: For complete adjustment capabilities, loosen the Adjustment Knob and Bracket-to-Arm Screw at the same time. 14 © Limitless Innovations, Inc.
Operation Instructions cont’d HOW TO SET THE MODE 1. Adjust the Light Sensitivity Knob to align the dial to Day, Night or somewhere in-between to better suit the surroundings or preferences. Day: LED Light is activated by motion regardless of whether the surrounding area is bright or dark. Night: LED Light is only activated by motion when the surrounding area is dark. NOTE: If additional Light is preferred in a bright environment, the Light Sensitivity Knob should be moved to the Day position.
Operation Instructions cont’d HOW TO SET THE DURATION 1. To adjust the timer, turn the Timer Knob until the dial aligns with one of the time durations. 10S: Once motion is sensed and the LED Light is activated, the LED Light will remain on for approximately 10-seconds unless motion is detected again. 20S: Once motion is sensed and the LED Light is activated, the LED Light will remain on for approximately 20-seconds unless motion is detected again.
Operation Instructions cont’d RED LED INDICATOR LIGHT 1. The Red LED Indicator Light will flash at different intervals depending on certain criteria (see below). NOTE: The Red LED Indicator Light is easiest viewed in a dark environment. 1. Blinks once every 5 seconds: stand-by mode. 2. Blinks quickly: Motion Sensor is detecting movement. 3. Blinks once every second: The batteries are low and the LED Lights will only activate in darkness. 4.
Certification IP44 RATING This device complies with IP44 enclosures. IP44 protects against water spray from any direction. IP (or “Ingress Protection”) ratings are defined in international standard EN 60529 (British BS EN 60529:1992, European IEC 60509:1989). They are used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. The numbers that follow IP each have a specific meaning.
Limited Warranty Your use of the product shall at all times require you to comply with all terms, conditions of use, instructions and recommendations set forth within the User Manual and the ChargeHub Terms and Conditions found at: Manual: LimitlessInnovations.com/Manual/Lumenology-Dual.pdf Warranty Terms and Conditions: LimitlessInnovations.com/Warranty-Terms-andConditions/Lumenology-Dual Are you having issues with your Limitless product? Contact our support team today at: LimitlessInnovations.
Limited Warranty cont’d water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Limitless Product for commercial purposes; (d) subjecting the Limitless Product to abnormal usage or conditions; and/or (e) other acts which are not the sole and absolute fault of Limitless. 3. Unauthorized Service or Modification.
Limited Warranty cont’d WHO DO I CONTACT TO MAKE A CLAIM? In the event of any warranty claim under the Limitless Limited Warranty, you can contact the telephone number below or provide a written correspondence to the address below at which time and in response thereto, you will receive instructions on how to ship any Limitless product at your expense, to a Limitless authorized repair center.
Limited Warranty cont’d NATIONAL STATUTORY RIGHTS CONSUMERS IN SOME JURISDICTIONS MAY HAVE LEGAL RIGHTS UNDER APPLICABLE NATIONAL LEGISLATION GOVERNING THE SALE OF CONSUMER GOODS, INCLUDING, WITHOUT LIMITATION, NATIONAL LAWS IMPLEMENTING EC DIRECTIVE 99/44. THESE RIGHTS ARE NOT AFFECTED BY THE WARRANTIES IN THIS LIMITED WARRANTY. 22 © Limitless Innovations, Inc.
Copyright Notice All Limitless products and information shared in this manual are protected by copyright. Copying, reproducing, reverse engineering or distributing any information of Limitlessrelated products hardware or software without a formal and written authorization and license from Limitless Innovations, Inc. is prohibited and may result in legal action to the full extent of the law. 23 © Limitless Innovations, Inc.
FCC Notice NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
All rights reserved. Lumenology is a registered trademark of Limitless Innovations, Inc. Design and specifications subject to change without notice. Products may vary from images shown. All other trademarks included herein are property of their respective owners. Made in China (855) 843-4828 Support@LimitlessInnovations.com LimitlessInnovations.com © Limitless Innovations, Inc.
