Installation Guide

Make sure the tension disk is screwed onto the ¼” 20 screw on the mounts
(gure 1). You will use this to angle your Lume Cube in the desired direction.
Mount your Lume Cubes to your Mavic 2 Mounts prior to mounting them on the
drone. Simply screw your Lume Cubes onto the screw on each mount (gure 1).
Angle your lights in the desired direction, and then spin the tension disk counter
clockwise (gure 2) until it tightens on the base of the Lume Cube.
(gure 1)
(gure 2)
(gure 1)