User Manual

10
MAINTENANCE AND SERVICE
Maintenance and Service
Before any work on the Jigsaw itself, pull the
main s plug.
General inspection
Regularly check that all the screws are tight as
they may vibrate and loosen over time.
Inspect t he power cable(3) prior to each use for
damage or wear.
Repairs should only be carried out by an
qualified technician.
Keep your tool clean at all times. Dirt and dust
will cause internal parts to wear quickly and
shorten the tool’s service life. Clean the body of
the tool with a soft brush or dry cloth.
We recommend using compressed air when
possible to clean down the sander. This aids the
products longevity.
CAUTIO N: Never use caustic agents to
clean plastic parts. If dry cleaning is not
sufficient, using a mild detergent on a
damp cloth is recommended.
VSJ100