SAFETY AND OPERATING MANUAL Variable Speed Jigsaw VSJ100 ORIGINAL INSTRUCTIONS VSJ100
TABLE OF CONTENTS Welcome to Lumberjack! Dear Customer, Congratulations on your purchase. Before using the product for the first time please be sure to read these instructions for use. They provide you with all information necessary for using the product safely and to ensure its long service life. Closely observe all safety information in these instructions! General Power Tool Safety Warnings…………………………………...01 - 03 Symbols ................ ……….…………………………………................….
GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your electric (corded) power tool or battery-operated (cordless) power tool. 1. Work area safety a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
GENERAL POWER TOOL SAFETY WARNINGS e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
GENERAL POWER TOOL SAFETY WARNINGS 6.2 Prevent dust accumulation at the workplace. Dust can easily ignite. 7 Additional Warnings for Sanders 7.1 Harmful/toxic dusts will arise from sanding e.g. lead painted surfaces, woods and metals. Contact with or inhalation of these dusts can endanger the health of operator and bystanders. Always use eye glasses and dust mask. 7.2 Hearing protection should be worn when using the sander. 7.3 Always wear safety glasses or eye shields when using the sander.
SYMBOLS Danger! – Read the operating instructions to reduce the risk of injury. Caution! Wear ear defenders. The impact of noise can cause damage to hearing. Caution! Wear safety goggles. Caution! Risk of Injury! Caution! Wear a dust mask.
MACHINE DETAILS AND INCLUDES Intended Use The machine has been designed for the use of sanding wood, plastics, metal and painted surfaces. Machine Details Specifications: Mains Voltage - 240V 12W Power Consumption - 750W No load Speed- 800 - 3000 RPM Stroke Length- 26 Wood (mm) 100 Steel (mm) 10 Weight - 2kg Includes. 1 1 . Variable speed dial 2. 0n/off trigger switch 3. Tool-free blade change 4. Vacuum adapter 5. Pendulum action 6. Locking knob edge guide 7. Base plate 8. Edge guide 9.
OPERATING INSTRUCTIONS 1. POWER SUPPLY The power tool supply must match the nameplate date. REMOVING THE BLADE Follow steps of Tool-Free Blade Installation (above). Carefully remove the blade. 2. SWITCHING ON AND OFF 1) Depress the trigger switch to turn on the jig saw. 2) Depress the lock-on button while the trigger switch is depressed to keep the saw for continuously operation. 3) Release the trigger switch to turn off the saw. 4.
OPERATING INSTRUCTIONS & APPLICATIONS 5. VARIABLE-SPEED SETTINGS Determine the optimum speed for cutting your workpiece by making a trial cut in a scrap piece of the same material. Experience will help you to determine the best results for a particular application. However, as a general rule, use slower speeds for harder, denser materials, and faster speeds for softer material. The variable speed feature of this jigsaw enhances the cutting performance, and saves the blade from undue wear. APPLICATIONS. 1.
APPLICATIONS 2) Hold saw firmly and tilt it forward so the toe of the steel base rests on the workpiece. Start the saw and then gradually lower the blade. When the blade touches the workpiece, continue pressing down on the toe of the steel base. Slowly pivot the saw like a hinge until the blade cuts through and the base rests flat on the workpiece. Then begin sawing along the cut line. 4. PARALLEL GUIDE This saw can be used with a parallel guide for quickly straight cutting.
Trouble Shooting VSJ100 09
MAINTENANCE AND SERVICE Maintenance and Service Before any work on the Jigsaw itself, pull the mains plug. General inspection Regularly check that all the screws are tight as they may vibrate and loosen over time. Inspect the power cable(3) prior to each use for damage or wear. Repairs should only be carried out by an qualified technician. Keep your tool clean at all times. Dirt and dust will cause internal parts to wear quickly and shorten the tool’s service life.
LUMBERJACK GUARANTEE 1.2.7 The product has not been used for hire purposes. 1. Guarantee 1.1 Lumberjack guarantees that for a period of 12 months from the date of purchase the components of qualifying products (see clauses 1.2.1 to 1.2.8) will be free from defects caused by faulty construction or manufacture. 1.2. During this period Lumberjack, will repair or replace free of charge any parts which are proved to be faulty in accordance with paragraph 1.1 providing that: 1.2.
LUMBERJACK GUARANTEE of purchase to Lumberjack. If you include a contact number with this it will speed your claim up. 2.4 Please note that it is essential that the letter of claim reaches Lumberjack on the last day of this Guarantee at the latest. Late claims will not be considered. 3. Limitation of Liability 3.1 We only supply products for domestic and private use.
CE DECLARATION OF CONFORMITY TOOLSAVE Unit C, Manders Ind. Est., Old Heath Road, Wolverhampton, WV1 2RP. Tel: 01902 450 470 Declares that the VARIABLE SPEED JIGSAW (VSJ100) Is in compliance with the regulations included in the Directives:2006/42/EC EC DECLARATION OF CONFORMITY Certificate for EC-type examination delivered by Intertek Testing Services Ltd.,Shanghai,ETL Semko Building No.86,1198 Qinzhou Road(North),Caohejing Development Zone,Shanghai 200233,China. (Verification No.
Parts List VSJ100 14
Parts Diagram VSJ100 15
