Product Manual

6
Determine tenon length before cutting
● The key is to have a gap
between the end of the
tenon and bottom of the
mortise hole
● This can be done by making
the tenon 1/8” to 1/4”
shorter than the mortise
hole is deep
Hole Depth
1/8” to 1/4”
Gap
Tenon Length
Calculated Tenon Length
Simple Tenon Length
● Tenon length can be controlled without
having the Industrial Series or Quick
Stop Pins
● Cut off a piece of tenon to use as a plug
to stop cutting at a set length
Cut Mark = desired tenon length + 3/4”
Gather the following
information and use the
calculation provided
below:
● Desired tenon
length
Cut Mark
3/4" Desired Tenon Length
Series Tenon Length
TRH1000
2 ½” – Plug Length
TRH1500
3 ½” – Plug Length
TRH2000
4 ½” – Plug Length
Plug Length
Tenon Length