Datasheet
Rundsteckverbinder mit Schraubverschluss nach IEC 61076-2-106, IP40
Circular connectors with threaded joint acc. to IEC 61076-2-106, IP40
Connecteurs circulaires avec verrouillage à vis suivant CEI 61076-2-106, IP40
www.lumberg.com 03/2015
03 03
Verpackung: im Karton
Packaging: in a cardboard box
Emballage: dans un carton
Chassis plug acc. to IEC 61076-2-106, IP40, with threaded
joint and solder terminals
SFV: for front mounting
SGV: for rear mounting
1. Temperature range -40 °C/+85 °C
2. Materials
Insulating body PA GF, V0 according to UL 94
Contact pin 3 to 8 poles CuZn, silver and flash gold-plated
Contact pin 12 poles CuZn, pre-nickeled and gold-plated
Housing Zn diecast, pre-copper and nickel-
plated
Ring nut CuZn, nickel-plated
3. Mechanical data
Mating with sockets KV, WKV
sockets according to IEC 61076-2-106
and IEC 60130-9
Protection
1
IP40
For further information see table
4. Electrical data (at T
amb
20 °C)
Material group
2
II (IEC)/1 (UL) (CTI ≥ 550)
Overvoltage category
2
I
For further information see table
1
according to DIN EN 60529,
only in locked position with a proper counterpart
2
acc. to IEC 60664/DIN EN 60664, CTI UL classification acc. to ANSI/UL 746A
SFV SFV
Bestellbezeichnung
Designation
Désignation
Polzahl
Poles
Pôles
Verpackungseinheit (VE)
Package unit (PU)
Unité d’emballage (UE)
Anschlussquerschnitt
Wire section
Section de racc. de fil
Bemessungsstrom
Rated current (T
amb
40 °C)
Courant assigné
Bemessungsspannung
2
Rated voltage
2
Tension assignée
2
Bemessungsspannung
2
Rated voltage
2
Tension assignée
2
Bemessungsstoßspannung
2
Rated impulse voltage
2
Tension de choc assignée
2
Isolationswiderstand
Insulation resistance
Résistance d’isole-
ment
mm² A V AC V AC V GΩ
SFV 30 SGV 30 3 50 0,75 5 300
(1)
250
(2)
1500 > 10
SFV 40 SGV 40 4 50 0,75 5 300
(1)
250
(2)
1500 > 10
SFV 50 SGV 50 5 50 0,75 5 100
(1)
32
(2)
500 > 10
SFV 50/6 SGV 50/6 5 50 0,75 5 300
(1)
160
(2)
1500 > 10
SFV 60 SGV 60 6 50 0,75 5 300
(1)
160
(2)
1500 > 10
SFV 70 SGV 70 7 50 0,75 5 300
(1)
160
(2)
1500 > 10
SFV 71 SGV 71 7 50 0,75 5 100
(1)
32
(2)
500 > 10
SFV 80 SGV 80 8 50 0,75 5 100
(1)
32
(2)
500 > 10
SFV 81 SGV 81 8 50 0,75 5 100
(1)
32
(2)
500 > 10
SFV 120 SGV 120 12 50 0,25 3 160
(1)
160
(2)
1500 > 10
Embase mâle suivant CEI 61076-2-106, IP40, avec verrouilla-
ge à vis et connexion par soudure
SFV: pour montage de front
SGV: pour montage par derrière
1. Température d’utilisation -40 °C/+85 °C
2. Matériaux
Corps isobody PA GF, V0 suivant UL 94
Contact à broche 3 à 8 pôles CuZn, argenté et doré flash
Contact à broche 12 pôles CuZn, sous-nickelé et doré
Boîtier Zn moulé sous pression, sous-cuivré
et nickelé
Écrou à anneau CuZn, nickelé
3. Caractéristiques mécaniques
Raccordement avec connecteurs femelles KV, WKV
connecteurs femelles suivant
CEI 61076-2-106 et CEI 60130-9
Protection
1
IP40
Pour plus de détails, voir tableau
4. Caractéristiques électriques (à T
amb
20 °C)
Groupe de matériau
2
II (CEI)/1 (UL) (CTI ≥ 550)
Catégorie de surtension
2
I
Pour plus de détails, voir tableau
1
suivant DIN EN 60529,
uniquement à l’état verrouillé avec un propre pendant
2
suivant CEI 60664/DIN EN 60664, classification CTI UL suivant ANSI/UL 746A
SGV SGV
(1) (2)
bei Verschmutzungsgrad 1 bzw. 2
(1) (2)
at Pollution degree 1 resp. 2
(1) (2)
à degré de pollution 1 resp. 2