Datasheet

Rundsteckverbinder mit Schraubverschluss nach IEC 61076-2-106, IP 40
Circular connectors with threaded joint acc. to IEC 61076-2-106, IP 40
Connecteurs circulaires avec verrouillage à vis suivant CEI 61076-2-106, IP 40
03
03 03
Verpackung: im Karton
Packaging: in a cardboard box
Emballage: dans un carton
Chassis plug acc. to IEC 61076-2-106, IP 40, with threaded
joint and solder terminals
SFV: for front mounting
SGV: for rear mounting
1. Temperature range -40 °C/+85 °C
2. Materials
Insulating body PA GF
Contact pin 3 to 8 poles CuZn, silvered and flash gilded
Contact pin 12 poles CuZn, pre-nickeled and gilded
Housing Zn diecast, nickeled
Ring nut CuZn, nickeled
3. Mechanical data
Mating with sockets 032098, 032099, KV, WKV
sockets according to IEC 61076-2-106
and IEC 60130-9
Protection
1
IP 40
For further information see table
4. Electrical data
For further information see table
1
according to DIN EN 60529,
only in locked position with a proper counterpart
2
according to VDE 0110/IEC 60664
SFV SFV
Bestellbezeichnung
Designation
Désignation
Polzahl
Poles
Pôles
Verpackungseinheit (VE)
Package unit (PU)
Unité d’emballage (UE)
Anschlussquerschnitt
Wire section
Section de racc. de fil
Bemessungsstrom
Rated current
Courant assigné
Bemessungsspannung
2
Rated voltage
2
Tension assignée
2
Prüfspannung
Test voltage
Tension d’éssai
Isolationswiderstand
Insulation resistance
Résistance d’isolement
Kontaktkapazität
Contact capacitance
Capacité de
contact
mm² A V AC kV AC eff. GΩ pF
SFV 30 SGV 30 3 50 0,75 5 250 2 > 10 ~ 2
SFV 40 SGV 40 4 50 0,75 5 250 2 > 10 ~ 2
SFV 50 SGV 50 5 50 0,75 5 60 1 > 10 ~ 3
SFV 50/6 SGV 50/6 5 50 0,75 5 250 2 > 10 ~ 2
SFV 60 SGV 60 6 50 0,75 5 250 2 > 10 ~ 2
SFV 70 SGV 70 7 50 0,75 5 250 2 > 10 ~ 2
SFV 71 SGV 71 7 50 0,75 5 60 1 > 10 ~ 3
SFV 80 SGV 80 8 50 0,75 5 60 1 > 10 ~ 3
SFV 81 SGV 81 8 50 0,75 5 60 1 > 10 ~ 3
SFV 120 SGV 120 12 50 0,25 3 60 1 > 10 ~ 3
Embase mâle suivant CEI 61076-2-106, IP 40, avec verrouilla-
ge à vis et connexion par soudure
SFV: pour montage de front
SGV: pour montage par derrière
1. Température d’utilisation -40 °C/+85 °C
2. Matériaux
Corps isolant PA GF
Contact à broche 3 à 8 pôles CuZn, argenté et doré flash
Contact à broche 12 pôles CuZn, sous-nickelé et doré
Boîtier Zn moulé sous pression, nickelé
Écrou à anneau CuZn, nickelé
3. Caractéristiques mécaniques
Raccordement avec connecteurs femelles 032098,
032099, KV, WKV
connecteurs femelles suivant
CEI 61076-2-106 et CEI 60130-9
Protection
1
IP 40
Pour plus de détails, voir tableau
4. Caractéristiques électriques
Pour plus de détails, voir tableau
1
suivant DIN EN 60529,
uniquement à l’état verrouillé avec un propre pendant
2
suivant VDE 0110/CEI 60664
SGV SGV
08/2012www.lumberg.com