Datasheet

03 032200
03/20192
Environmental conditions
Temperature range -40 °C/+85 °C
Materials
Insulating body PA GF, V-0 according to UL94
Contact bush CuZn, silver-plated and flash gold-
plated
Schirmfeder stainless steel
Insulating sleeve PA, V-0 according to UL94
Clamp PA, V-0 according to UL94
Housing CuZn, nickel-plated/Zn diecast,
pre-copper and nickel-plated
Knurled nut CuZn, nickel-plated
Seal CR (flat), EPDM (O-ring)
Mechanical data
Insertion force/contact ≤ 5.0 N
1
Withdrawal force/contact ≥ 1.2 N (3-8 poles)
≥ 0.9 N (12-14 poles)
1
Tightening torque connector 1-3 Nm
Tightening torque nut 1-3 Nm
Protection class IP68
2
1
measured with a polished steel pin, nominal thickness 1.5 mm
2
according to IEC DIN EN 60529, only in locked condition with an appropriate counterpart; IPX8
requirements under agreement between manufacturer and user
Connectable conductors for solder area
Section ≤ 0.75 mm² (AWG 20)
Cable diameter 4–10 mm
Electrical data (at Tamb 20 °C)
Contact resistance ≤ 5 mΩ
Rated current 5 A (Tamb 40 °C)
Rated voltage 100 V (with pollution degree 1)
32 V (with pollution degree 2)
Rated impulse voltage 500 V
Material group II (IEC)/1 (UL) (CTI ≥ 550)
Overvoltage category I
Insulation resistance > 100 MΩ
of 4