Datasheet

www.lumberg.com 09/2015
Rundsteckverbinder mit Schraubverschluss nach IEC 61076-2-106 und AISG-Spezifikation, IP68
Circular connectors with threaded joint acc. to IEC 61076-2-106 and AISG specification, IP68
Connecteurs circulaires avec verrouillage à vis suivant CEI 61076-2-106 et spécification AISG, IP68
0322 0322
Socket acc. to IEC 61076-2-106, IP68, with threaded joint
and solder terminals, 360° shielded
0322-1: also complies with AISG specifications
1. Temperature range -40 °C/+85 °C
2. Materials
Insulating body PA GF, V0 according to UL 94
Contact bush 3 to 8 poles CuZn, silver and flash gold-plated
Contact bush 12 to 14 poles CuZn, pre-nickel and gold-plated
Housing CuZn, nickel-plated
Knurled nut CuZn, nickel-plated
Gasket NBR
3. Mechanical data
Insertion force/contact 3–8 poles
1
< 5.0 N
Insertion force/contact 12–14 poles
2
< 5.0 N
Withdrawal force/contact 3–8 poles
1
1.2 N
Withdrawal force/cont. 12–14 poles
2
0.9 N
Mating with plugs 031..., 0331, 0332..., 0365
plugs according to IEC 61076-2-106
and IEC 60130-9
Protection
3
IP68
For further information see table
4. Electrical data (at T
amb
20 °C)
Contact resistance 5 m
Attenuation see graph on page 3.64
For further information see table
1
measured with a polished steel pin, nominal thickness 1.5 mm
2
measured with a polished steel pin, nominal thickness 1.0 mm
3
according to DIN EN 60529, only in locked position with a proper counter
part, IP X8 requirements under agreement between user and manufac-
turer
4
acc. to IEC 60664/DIN EN 60664, CTI UL classification acc. to ANSI/UL 746A
Connecteur femelle suivant CEI 61076-2-106, IP68, avec ver-
rouillage à vis et connexion par soudure, blindé à 360°
0322-1: aussi conforme aux spécifications AISG
1. Température d’utilisation -40 °C/+85 °C
2. Matériaux
Corps isobody PA GF, V0 suivant UL 94
Prise de contact 3 à 8 pôles CuZn, argenté et doré flash
Prise de contact 12 à 14 pôles CuZn, sous-nickelé et doré
Boîtier CuZn, nickelé
Écrou moleté CuZn, nickelé
Joint d’étanchéité NBR
3. Caractéristiques mécaniques
Force d’insertion/contact 3–8 pôles
1
< 5,0 N
Force d’insertion/cont. 12–14 pôles
2
< 5,0 N
Force de séparation/con. 3–8
pôles
1
1,2 N
Force de séparation/cont.
12–14 pôles
2
0,9 N
Raccordement avec connecteurs mâles 031..., 0331,
0332..., 0365
connecteurs mâles suivant
CEI 61076-2-106 et CEI 60130-9
Protection
3
IP68
Pour plus de détails, voir tableau
4. Caractéristiques électriques (à T
amb
20 °C)
Résistance de contact 5 m
Atténuation voir graphique à la page 3.64
Pour plus de détails, voir tableau
1
mesurée avec une tige d’acier poli, épaisseur nominale 1,5 mm
2
mesurée avec une tige d’acier poli, épaisseur nominale 1,0 mm
3
suivant DIN EN 60529, uniquement à l’état verrouillé avec un propre
pendant, exigences IP X8 après entente entre utilisateur et fabricant
4
suivant CEI 60664/DIN EN 60664, classification CTI UL suivant ANSI/UL 746A
Verpackung: Einzelteilesätze in Kunststoffbeuteln, im Karton
Packaging: sets of individual parts in plastic bags, in a cardboard box
Emballage: kits de pièces détachées dans sachets en plastique, dans un carton
Bestellbezeichnung
Designation
Désignation
0322 03 3 50 0,75 4–8 5 250 2 > 10 ~ 2
0322 04 4 50 0,75 4–8 5 250 2 > 10 ~ 2
0322 05 5 50 0,75 4–8 5 60 1 > 10 ~ 3
0322 05-1 5 50 0,75 4–8 5 250 2 > 10 ~ 2
0322 06 6 50 0,75 4–8 5 250 2 > 10 ~ 2
0322 07 7 50 0,75 4–8 5 250 2 > 10 ~ 2
0322 07-1 7 50 0,75 4–8 5 60 1 > 10 ~ 3
0322 08 8 50 0,75 4–8 5 60 1 > 10 ~ 3
0322 08-1 8 50 0,75 4–8 5 60 1 > 10 ~ 3
0322 12 12 50 0,25 4–8 3 60 1 > 10 ~ 3
0322 14 14 50 0,25 4–8 3 60 1 > 10 ~ 3
0322-1 05-3 5 50 0,75 4–8 5 60 1 > 10 ~ 3
0322-1 08-1 8 50 0,75 4–8 5 60 1 > 10 ~ 3
Polzahl
Poles
Pôles
Verpackungseinheit (VE)
Package unit (PU)
Unité d’emballage (UE)
Anschlussquerschnitt
Wire section
Section de racc. de fil
Kabeldurchmesser
Cable diameter
Diamètre de cable
Bemessungsstrom
Rated current
Courant assigné
Bemessungsspannung
4
Rated voltage
4
Tension assignée
4
Prüfspannung
Test voltage
Tension d’éssai
Isolationswiderstand
Insulation resistance
Résistance d’isolement
Kontaktkapazität
Contact capacitance
Capacité de
contact
mm
2
mm A V AC kV AC eff. G pF
0322-1 0322-1