Owner manual
Table Of Contents
- 1 Introduction
- 2 Configuring Video Settings
- 3 Capturing Images and Data
- 4 Using Calibrate Tab Features
- 5 Troubleshooting
- Index
Pearl Control Software Manual Using Calibrate Tab Features 23
4 Using Calibrate Tab Features
Note: The Calibrate Tab should only be unlocked by trained technicians.
4.1 Accessing the Calibrate Tab
A password is required to unlock and access the Calibrate Tab and Reset Camera feature.
To access the Calibrate Tab:
1. Click Help on the Menu Bar.
2. Select Advanced.
3. Type in the following password: engineer
Note: The password is case-sensitive.
4. Click OK or press enter.
5. The Calibrate Tab will appear below the Capture Tab in the Action Bar.