User guide

Chapter 4
_________________________________________________________________________
________________________________________________________________________
BE6027-12 LumaSoft Gas Software LumaSense Technologies A/S
7810 and 7860 Page 78 of 194
4.2.2.3 Configuration of curves (Gas view)
CurveColor
Each of the channels has a default selected curve color, see Figure 4.40.
To change the color of the channel press the colored square in the
CurveColor column.
Figure 4.40 Change the color of the curves
Select a color for the curve in the Color window, see Figure 4.41.
Figure 4.41 Select a color for the curve
Repeat the procedure for all the gasses.