User guide

Chapter 4
_________________________________________________________________________
________________________________________________________________________
BE6027-12 LumaSoft Gas Software LumaSense Technologies A/S
7810 and 7860 Page 56 of 194
4.2.1.3 Configuration of curves (Channel view)
CurveColor
Each of the filters has a default selected curve color, see Figure 4.10.
To change the color of the curves press the colored square in the
CurveColor column.
Figure 4.10 Change the color of the curves
Select a color for the curve in the Color window, see Figure 4.11.
Figure 4.11 Select a color for the curve
Repeat the procedure for all the gasses.