User guide

Chapter 4
_________________________________________________________________________
________________________________________________________________________
BE6027-12 LumaSoft Gas Software LumaSense Technologies A/S
7810 and 7860 Page 51 of 194
This chapter shows how to
- perform a measurement task. (Section 4.1)
- present the measurement data in graphic display (Channel view).
(Section 4.2.1)
- present the measurement data in graphic display (Gas view). (Section
4.2.2)
- present the measurement data in numeric display. (Section 4.3)
- set user events. (Sections 4.2.1.7{Channel view}, 4.2.2.8{Gas view}
and 4.3.3)
- print graphic and numeric displays. (Sections 4.2.1.8{Channel view},
4.2.2.9{Gas view} and 4.3.4)
- display historical data. (Section 4.2.1.9{Channel view}, 4.2.2.10{Gas
view}
- view alarms. (Section 4.4)
- export measurement data. (Section 4.5)
- view error and warnings. (Section 4.6)
- export log (Section 4.7)
4.1 Measurement start and stop
If a measurement task is not open, select File and Open Task, see
Figure 4.1 or select from the task bar.
Figure 4.1 File pull-down: Open Task