Owner manual
Chapter 4
_________________________________________________________________________________________
_____________________________________________________________________________
BE6021-11 1316A-2 Multi Gas Monitor LumaSense Technologies A/S
Instruction Manual Page 60 of 97
Figure 4.5. Status Window showing Zero not required.
The 30-minute zero request interval timer is reset.
4.2.2 Error and Warnings Related to a Zero Calibration
The following conditions cause the Multi Gas Monitor –INNOVA 1316A-
2 to refuse to execute the zero calibration.
1. The Multi Gas Monitor –INNOVA 1316A-2 is in Start-Up mode
See figure 4.6, Operating Mode.