Owner manual

Chapter 2
_________________________________________________________________________________________
_____________________________________________________________________________
BE6021-11 1316A-2 Multi Gas Monitor LumaSense Technologies A/S
Instruction Manual Page 19 of 97
2.1.4 Checking and Changing the Fuses
On delivery ensure that the correct fuses are used. See section
5.1.2.
2.2 The BZ6013 Software
This software provides procedures to:
• Set-up and Calibrate the monitor prior to measuring
• Display measurement data as coloured graphics or numeric
values
• Store measurement data in a log file on the PC’s disk while
measurements are being made
• Control up to four Multi Gas Monitors INNOVA 1316A-2
The BZ6013 application can be installed by using the BZ6013
software CD-ROM.
2.2.1 Computer Requirements
The minimum requirements to run this software are:
Processor
Minimum: 1 gigahertz (GHz) Pentium
processor
Operating System
Windows XP (minimum Service Pack 2)
Windows Vista
Windows 7
RAM
Minimum: 512 MB (Vista or 7: 1024 MB
Hard Disk
Up to 100 MB of available space may be
required.
Display
Minimum: 1024 x 768 high color, 32-bit
Total port connections
1 RS232 port or 1 USB port
CD-ROM drive