Manual

Chapter 2
______________________________________________________________________
_____________________________________________________________________________
BE6030-13 1314i Photoacoustic Gas Monitor LumaSense Technologies A/S
Page 23 of 199
Level 2 is the Expert level, which in addition to Level 1 access
enables set up of parameters. Full Reset is possible.
Level 3 is the Super-User level, which allows all possible operations
including calibration.
2.7.1 Default settings for User Level and Password.
Before dispatch from the factory the User Level and the Password are
set to the following default setting.
User Level 3
And the default setting for the Password is:
Password: ***** (5 times *)
These settings are to be used to change user level or password the
first time.
2.7.2 Changing the Password
In order to change the Password Press the Lock function push
button on the front of the Monitor.
The following text is displayed.
Press S3 “CHANGE PASSWORD”
The following text appears.
1. Press ↵ to change value.
The following text appears.
2. Enter the old Password using the ▲ and ▼ keys.
3. Press ↵.
CURRENT USER LEVEL IS X
CHANGE USER LEVEL CHANGE PASSWORD
ENTER PASSWORD "*****"
PRESS ENTER TO CHANGE VALUE
ENTER PASSWORD "*****"
CANCEL DEFAULT