Instruction Manual

Chapter 4
________________________________________________________________________
________________________________________________________________________
BE1285-15 1309 Multipoint Sampler LumaSense Technologies A/S
Page 38 of 42
4.2.4 1309 Check Jobs
Table 4.4 The interface jobs which check the 1309’s functions.
Job Header Data Effect on 1309
Status? No data. Reads-
out the 1309’s
status-flag.
Reset_System No data. Resets the 1309.
For further information, refer to section 3.6.
4.2.5 Error Condition and Service Request Jobs
These jobs allow the identification of error conditions in the 1309. For
further information, refer to section 3.7.
Table 4.5 The interface jobs which investigate error conditions and al-
low generation of service requests.
Job Header Data Effect on 1309
Ser-
vice_Request_E
nable
Decimal value of bits
you want to enable.
Selectively enables bits
in the status byte.
Ser-
vice_Request_Enable
?
No data Reads-out from the
1309 the enabled bits
of the status byte.
Reset_Status_Byte No data. Resets all the bits of
the status byte to zero.
Warning? No data. Reads-out the 1309’s
Warning flags.
Error? No data Reads-out the 1309’s
Error flags.
4.2.6 Standardised Jobs
These jobs do not directly affect the operation of the 1309. The De-
fine_Terminator job is detailed in section 3.2.1. The Output_Header job
is detailed in section 3.2.2.
The jobs with syntax of the type “*RST” are standardised IEEE 488.2
jobs. Most of these jobs are identical to normal 1309 jobs in operation;
the function description refers you to the appropriate 1309 job.