Instruction Manual

Chapter 4
________________________________________________________________________
________________________________________________________________________
BE1285-15 1309 Multipoint Sampler LumaSense Technologies A/S
Page 37 of 42
4.2.1 Sampler System Jobs
These jobs control the 1309’s sampler system. Further information
about these jobs is given in section 3.3.
Table 4.1 The interface jobs which control the 1309’s sampler system
Job Header Data Effect on 1309
Open_Sampling_V
alv
e
Up to 12 sampling
-
valve numbers
Opens the specified
sampling valves
Con-
nect_Sampling_Valv
e
To_Monitor
To_Sampling_Pump
Routes the air-
sample
either to the gas moni-
tor, or to the Waste
Air Outlet.
4.2.2 Temperature Measurement Jobs
This job controls temperature measurement with the 1309.
Table 4.2 The interface jobs which control the 1309’s temperature-
measurement function.
Job Header Data Effect on 1309
Sen-
sor_Temperature
?
Specific temperature-
sensor number
Reads-out the temper
a-
ture (°C) at the specified
temperature-sensor.
4.2.3 Pressure Measurement Jobs
This job measures the atmospheric pressure around the 1309.
Table 4.3 The interface jobs which control the 1309’s pressure-
measurement function.
Job Header Data Effect on 1309
Pressure? No data Reads-out the atmos-
pheric pressure (kPa)
surrounding the 1309.