Manual

Chapter 5
________________________________________________________________________
_______________________________________________________________________
BE1085-14
1303 Multipoint Sampler and Doser LumaSense Technologies A/S
Page 59 of 60
5.1 Cleaning the instrument
It is recommended to clean the Instrument using a soft damped cloth.
5.2 Service and repair
The Type 1303 Multipoint Sampler and Doser is designed and con-
structed to provide the user with many years of safe, trouble-free oper-
ation. However, should a fault occur which impairs its correct function
and operating safety, then it should be immediately disconnected at the
mains source and secured against further operation. For repair contact
your local LumaSense Technologies A/S service representative. Under
no circumstances should repair be attempted by persons not qualified
in the service of electronic instrumentation.