Manual

Chapter 4
________________________________________________________________________
_______________________________________________________________________
BE1085-14
1303 Multipoint Sampler and Doser LumaSense Technologies A/S
Page 56 of 60
Table 4.6 The interface jobs which investigate error conditions and al-
low generation of service requests.
Job Header Data Effect on 1303
Service_Request_Enable Decimal value of
bits you want to
enable
Selectively enables
bits in the status
byte.
Service_Request_Enable
?
No data Reads-
out from the
1303 the enabled
bits of the status
byte.
Reset_Status_Byte No data.
Resets all the bits of
the status byte to
zero.
Warning? No data. Reads-out the
1303’s Warning
flags.
Error? No data Reads-out the
1303’s Error flags.
4.2.7 Standardised Jobs
These jobs do not directly affect the operation of the 1303. The De-
fine_Terminator job is detailed in section 3.2.1. The Output_Header job
is detailed in section 3.2.2.
The jobs with syntax of the type “*RST” are standardised IEEE 488.2
jobs. Most of these jobs are identical to normal 1303 jobs in operation;
the function description refers you to the appropriate 1303 job.