Manual

Chapter 4
________________________________________________________________________
_______________________________________________________________________
BE1085-14
1303 Multipoint Sampler and Doser LumaSense Technologies A/S
Page 55 of 60
Table 4.4 The interface jobs which control the 1303’s temperature-
measurement function.
Job Header Data Effect on 1303
Sensor_Temperature
?
Specific tempera-
ture-sensor number
Reads-out the tem-
perature (°C) at the
specified tempera-
ture-sensor.
4.2.5 1303 Check Jobs
These jobs check the various functions of the 1303. For further infor-
mation, refer to section 3.8.
Table 4.5 The interface jobs which check the 1303’s functions.
Job Header Data Effect on 1303
Sampling_Pump_Pressure
?
No data. Measures and
reads-out the pres-
sure (kPa) across
the
sampling pump.
Dosing_Pump_Pressure? No data. Measures and
reads-out the pres-
sure (kPa) across
the dosing pump.
Status? No data. Reads-out the
1303’s status-flag.
Check_System No data. Starts a check of
the 1303’s sampler
system.
Reset_System No data. Resets the 1303.
4.2.6 Error Condition and Service Request Jobs
These jobs allow the identification of error conditions in the 1303. For
further information, refer to section 3.9.