Manual

Chapter 4
________________________________________________________________________
_______________________________________________________________________
BE1085-14
1303 Multipoint Sampler and Doser LumaSense Technologies A/S
Page 53 of 60
4.2.2 Sampler System Jobs
These jobs control the 1303’s sampler system. Further information
about these jobs is given in section 3.5.
Table 4.2 The interface jobs which control the 1303’s sampler system.
Job Header Data Effect on 1303
Open_Sampling_Valve Up to 6 sampling-
valve numbers.
Opens the speci-
fied sampling
valves.
Connect_Sampling_V
alve
To_Monitor
To_Sampling_Pump
Routes the air-
sample either to
the Gas Monitor,
or via the sam-
pling pump to the
Waste Air Out-
let.
Sampling_Pump On
Off
Starts/stops the
sampling pump.
4.2.3 Doser System Jobs
These jobs control the dosing function of the 1303. For further infor-
mation about the calibration of the doser system, refer to section 3.4.
For further information about using the doser system, see section 3.6.