Manual

Chapter 2
________________________________________________________________________
_______________________________________________________________________
BE1085-14
1303 Multipoint Sampler and Doser LumaSense Technologies A/S
Page 18 of 60
Fig. 2.6. Interface address 15
If the system comprise two 1303 instruments the standard interface
address of the second 1303 should be 16, see Fig. 2.7.
Fig. 2.7. Interface address 16
2.3 Connecting Tubing to the 1303
The 1303 is connected via tubing to:
the sampling points;
the dosing points (if dosing is required);
to a suitable tracer-gas supply;
to the Gas Monitor being used to analyze the gases that are sampled;