Owner's manual

BoilerSpection HD/SD Manual BoilerSpection Installation Guide  23
Figure 14: Main components in a BoilerSpection Camera and Retraction Device System
The main components in a BoilerSpection Camera and Retraction Device System are:
BoilerSpection HD Components BoilerSpection SD Components
A Mounting Plate, 12" x 18" x 1/2" stainless steel
typical
Mounting Plate, 12" x 18" x 1/2" stainless steel
typical
B 1 in. NPT air to shutter box (5 psi at 20 SCFM
typical)
1 in. NPT air to shutter box (5 psi at 20 SCFM
typical)
C Wall box Sleeve, 5" x 5" stainless steel box
tubing
Wall box Sleeve 2.375" stainless steel round
tube
D Shutter Flap Shutter Flap
E Wall box back plate Wall box back plate
F Retract Cylinder, 14" (356mm) stroke Retract Cylinder, 15" (381mm) stroke
G Slide Track Block Slide Track Block
H Mounting Plate (retract to camera) N/A
I Retract “L” Bracket Retract “L” Bracket
J Slide Track Rods (2), 3/4" diameter x 24" length Slide Track Rods (2), 5/8" dia. x 30" length
K Air Inlet to Retract, 1/2" NPT Air Inlet to Retract, 1/4" NPT
L Air Inlet to Insert, 1/2" NPT Air Inlet to Insert, 1/4" NPT